Skip to content
TRI-BUILT 7 in. #12 Standard Drill Point Coated Roofing Screws, 1,000-Count Bucket
Regular price $445.02TRI-BUILT 7 in. #12 Standard Drill Point Coated Roofing Screws, 1,000-Count Bucket
This TRI-BUILT bucket contains 1,000 #12 standard drill point coated roofing screws, 7 in. long, in one 48 lb bucket. These extra-long coated screws are FM Approved and Miami-Dade County Approved and drive without pre-drilling. Use them for deep fastening through thick insulation into the structural deck.
Key Features:
- Self-drilling point: Standard drill point drills and taps in one operation, no pre-drilling needed.
- #12 screw size: Standard #12 shank size for roofing fastening systems.
- 7 in. length: Long length handles deep fastening through thick insulation assemblies.
- Coated finish: Coated screws as described for this item.
- FM Approved: FM Approved and Factory Mutual Approved as listed.
- Miami-Dade Approved: Miami-Dade County Approved as printed in the listing.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | TRI-BUILT |
| Manufacturer model | RGDP007B-TRI |
| Sell unit | 1 bucket of 1,000 screws |
| Product line | Standard Drill Point Roofing Fasteners |
| Screw size | #12 |
| Nominal size | 7 in. |
| Dimensions | 7 in. length |
| Point type | Standard drill point |
| Finish | Coated |
| Pack quantity | 1,000 screws per bucket |
| Weight | 48 lb per bucket |
| Approvals | FM Approved; Factory Mutual Approved; Miami-Dade County Approved |
| Intended use | Deep roofing attachment through insulation |
Coverage & How Much You Need:
One bucket contains 1,000 screws. Size the order from your fastening pattern and assembly depth, since spacing depends on panel profile and wind requirements.
Fit and Compatibility:
Intended for #12 drill point fastening where total assembly thickness requires 7 in. screws, such as recover installations over thick insulation. Panels, plates and insulation are sold separately.
Frequently Asked Questions (FAQ):
Q: How many screws come in one bucket?
A: 1,000 coated screws per bucket, weighing about 48 lb.
Q: What length is this screw?
A: This is the 7 in. length in the #12 standard drill point coated series.
Q: What is the coating for?
A: The screws are coated, as described for this item; specific coating composition is not detailed in the listing.
Q: Are these approved for high-wind zones?
A: The listing states FM Approved, Factory Mutual Approved and Miami-Dade County Approved; confirm with local code.
Q: Do I need a special driver?
A: Use a screw gun with a magnetic bit and depth adjustment sized for #12 roofing screws.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Reserve 7 in. screws for assemblies where combined panel and insulation thickness genuinely demands it; overly long screws waste material and can deflect. Confirm deck embedment depth with your assembly spec, and drive with a depth-set chuck so the point seats without overdriving the washer or panel.
Long drill point screws are sharp and generate metal swarf; wear eye protection and gloves when driving.
Order the TRI-BUILT 7 in. #12 coated drill point roofing screw bucket for deep-fastening recover projects.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
