Skip to content
Elevate HD HailGard Insulation Fasteners, 8 in., Bugle-Head, Red, Box of 500
Regular price $710.00Elevate HD HailGard Insulation Fasteners, 8 in., Bugle-Head, Red, Box of 500
The Elevate HD HailGard Fastener is an 8 in. bugle-head fastener designed to secure ISOGARD HG / HailGard insulation or OSB and plywood overlays in commercial roofing. Its bugle head sits flush with the top layer of insulation, and the fastener anchors into 22 ga. steel, concrete or wood decks. Each box contains 500 red-coated fasteners.
Key Features:
- Purpose-Built: Specifically designed for roofing applications using ISOGARD HG / HailGard insulation or OSB or plywood overlays.
- Multi-Deck Hold: Fastens into 22 ga. steel, concrete or wood decking.
- Flush Bugle Head: Bugle-head design lets the head install flush with the top layer of insulation or overlay board.
- Substrate Ready: Exceptional choice for attaching ISOGARD HG / HailGard insulation used as a substrate for shingles or metal roofing.
- Bulk Box: Box of 500 fasteners for efficient commercial roof installation.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Sell unit | 1 box of 500 fasteners |
| Product line | HD ISOGARD HG / HailGard Fasteners |
| Material | Metal (color: red) |
| Color / finish | Red |
| Length | 8 in. |
| Head type | Bugle head, installs flush with top insulation layer |
| Fastens into | 22 ga. steel, concrete or wood decking |
| Pack quantity | 500 per box |
| Intended use | Fastening ISOGARD HG / HailGard insulation, OSB or plywood overlays in roofing; substrate for shingles or metal roofing |
Coverage & How Much You Need:
Fastener density follows the fastening pattern required by your roof system specification; at a typical pattern you can estimate boxes needed from total insulation square footage divided by the specified fasteners per board. Confirm pattern with the system specification.
Fit and Compatibility:
Designed for use with Elevate ISOGARD HG / HailGard Composite Insulation, OSB or plywood overlays over 22 ga. steel, concrete or wood decks. Verify deck type and use the fastening pattern prescribed by the roof system specification; compatible plates and tools are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One box containing 500 8 in. HD HailGard fasteners.
Q: What decks can this fasten into?
A: It is designed for 22 ga. steel, concrete or wood decking; confirm deck-specific requirements in your system specification.
Q: Will the head sit flush?
A: Yes, the bugle-head design allows the head to be installed flush with the top layer of ISOGARD HG / HailGard insulation, OSB or plywood.
Q: Can it be used under shingles or metal roofing?
A: Yes, it is an excellent fastener for attaching ISOGARD HG / HailGard insulation used as a substrate for roofing shingles or metal roofing.
Q: What length should I choose?
A: The 8 in. length accommodates insulation plus overlay thickness plus required deck penetration; verify against your specified fastening pattern.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
For hail-rated systems, fastener type and pattern are as important as the insulation itself, so follow the specified fastener density exactly. The bugle head helps prevent telegraphing through thin overlay boards. On steel and concrete decks, confirm that your installation equipment is rated for those substrates before starting.
Wear eye protection and gloves when driving fasteners; ensure the fastener length stops within the deck and does not penetrate below the structure.
Stock up on Elevate HD HailGard 8 in. fasteners, 500 per box, for your next commercial roof project.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
