Skip to content
Elevate #12 x 1-5/8 in. Standalone Insulation Fasteners, 1,000 Count Bucket
Regular price $119.00Orders start at $399 — combine any items to reach the minimum. Learn more
Elevate #12 x 1-5/8 in. Standalone Insulation Fasteners, 1,000 Count Bucket
The Elevate Standalone Insulation Fastener is a #12 self-drilling screw, 1-5/8 in. long, supplied 1,000 screws per bucket. It is designed for attaching roofing insulation boards to steel decks in Elevate low-slope roofing systems, using a self-drilling point that eliminates pre-drilling in steel.
Key Features:
- Self-drilling point: The self-drilling tip penetrates steel deck without pre-drilling a pilot hole.
- #12 screw size: A #12 diameter provides the strength needed for insulation attachment.
- 1-5/8 in. length: The 1-5/8 in. length is sized for typical insulation thickness over steel deck.
- 1,000 count bucket: Supplied in a 1,000-count bucket that keeps a crew fastening with fewer interruptions.
- System matched: From Elevate, the low-slope roofing brand, for use within its roofing assemblies.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Sell unit | 1 bucket, 1,000 screws |
| Product line | Elevate Standalone Insulation Fasteners |
| Available colors | Gray |
| Available sizes | #12 x 1-5/8 in. |
| Material | Steel (self-drilling screw) |
| Screw size | #12 diameter |
| Length | 1-5/8 in. |
| Pack quantity | 1,000 per bucket |
| Intended use | Attaching insulation board to steel deck in low-slope roofing systems |
| Manufacturer part number | W56RAC1201 |
Coverage & How Much You Need:
Fastener count depends on the specified fastening pattern; typical low-slope insulation attachment uses roughly one fastener per 1-2 sq ft of insulation, so a 1,000-count bucket covers several squares depending on wind-uplift requirements.
Fit and Compatibility:
Intended for use with Elevate low-slope roofing insulation and membrane assemblies over steel deck; confirm plate and fastener combination requirements with the system specification. Insulation, plates and membranes are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one sell unit?
A: One bucket containing 1,000 self-drilling #12 x 1-5/8 in. insulation fasteners.
Q: Do I need a pilot hole in steel deck?
A: No, the self-drilling point cuts through steel deck, so pre-drilling is not required when used with the proper screwgun.
Q: What fastener pattern should I use?
A: Follow the Elevate system specification and the project wind-uplift requirements for fastener density and plate use.
Q: Can these be used with insulation plates?
A: Yes, insulation fasteners of this type are commonly used with matching plates; check the Elevate system requirements for the approved combination.
Q: Is this for wood deck?
A: The category lists these as self-drilling screws, which are intended for steel deck; verify deck type against the system specification before ordering.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use these screws with a screwgun set to a consistent depth so the fastener seats without stripping or overdriving the insulation. Match fastener length to the total insulation plus deck thickness, and pair with the correct Elevate plates where the assembly calls for them. On high-wind projects, follow the uplift-derived pattern rather than the minimum.
Wear eye protection when driving self-drilling screws; fasteners and metal chips can eject from the tool at high speed.
Order the Elevate #12 x 1-5/8 in. insulation fasteners to keep your low-slope roofing attachment on specification.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
