Skip to content

Brand hall

Trex

Reclaimed wood and recycled film, made into deck boards in Winchester, Virginia since 1996.

Trex · Winchester, Virginia · est. Winchester, 1996NYSE: TREX · per Trex, the world's largest manufacturer of wood-alternative decking · 40+ countries

Trex was formed in 1996 through the buyout of a division of Mobil Corporation and is headquartered in Winchester, Virginia. Per Trex, its boards are made from 95% recycled and reclaimed materials — reclaimed wood and recycled polyethylene film, bonded and capped. This hall sets out the record — founding, public listing, the move to capped composites — then the practical part: how to read a board's item number, why the grooved edge matters, and what the installation guide demands of joists and gaps. Current-line boards are stocked at Super Arbor.

Wing I

The record

The register, in eight exhibits.

  1. Exhibit 01 — 1996

    Out of Mobil

    Four Mobil executives buy the corporation's composite-decking division and form Trex Company, LLC in Winchester, Virginia. Trex's own account is spare: the firm was "formed in 1996 through the buyout of a division of Mobil Corporation." The company is headquartered in Winchester to this day.

    Styled visualization of a 1990s recycling works with baled plastic film and reclaimed sawdust
  2. Exhibit 02 — 1999

    Public listing

    Trex goes public in April 1999: the offering is priced at $10.00 per share, the stock begins trading on the New York Stock Exchange on April 8, and the sale nets roughly $41 million. The company trades on the NYSE today as TREX.

  3. Exhibit 03 — 2010

    Transcend and the shell

    Trex Transcend reaches the market in January 2010 — the premium line whose shelled, high-performance construction becomes the template for everything after it. Trex later dates its modern portfolio from this launch: within four years, no earlier-generation board remains in the lineup.

    Stylized macro rendering of a capped composite board surface with water beading on the grain
  4. Exhibit 04 — 2014

    All high-performance

    Trex announces its decking portfolio is now entirely high-performance shelled product — Select, Enhance and Transcend in a good-better-best ladder — noting that every decking product in the line-up "did not exist four years ago." Uncapped legacy composite is gone.

  5. Exhibit 05 — 2021

    The billion-dollar year

    Full-year consolidated net sales reach $1.2 billion, up 36 percent — reported in February 2022 as record results. It is the company's first crossing of the billion-dollar mark, a quarter century after the Mobil buyout.

  6. Exhibit 06 — 2022

    Transcend Lineage

    Trex unveils Transcend Lineage in May 2022 — engineered, per the company, with heat-mitigating technology in the shell to reflect the sun and run cooler than comparable composite colors. Launch colors are Rainier and Biscayne; Trex's product pages today call it the company's coolest decking yet.

  7. Exhibit 07 — 2023

    A luxury tier, tiered warranties

    Signature decking debuts in February 2023 as the luxury tier, and Trex restructures decking warranties by line: 50-year limited residential for Transcend and Transcend Lineage, 35-year for Select, 25-year for Enhance — with fade and stain terms written into a single warranty document.

  8. Exhibit 08 — Today

    The recycling ledger

    Per Trex, its boards are made from 95% recycled and reclaimed materials; the company counts more than 5.5 billion pounds of plastic film recycled to date, sales in more than 40 countries, and describes itself as the world's largest manufacturer of wood-alternative decking.

Interactive exhibit

One deck, opened

A composite deck assembly, separated into board, clip, and frame. Open the numbered plates.

Stylized exploded-view CGI of a composite deck assembly: capped boards, hidden fastener hardware, and a taped joist floating in alignment
  1. 01

    The capped shell

    Current Trex boards are capped composites — a bonded outer shell over the core. On Transcend Lineage and select Enhance colors, Trex builds heat-mitigating technology into that shell to reflect the sun. The shell is also the warranty's boundary: coverage is void if the surface is punctured, painted or damaged with sharp-edged tools.

  2. 02

    The composite core

    Beneath the cap sits the composite itself: per Trex, 95% recycled and reclaimed materials — reclaimed wood fiber and recycled polyethylene film recovered from post-consumer, post-commercial and post-retail streams. The company counts more than 5.5 billion pounds of plastic film recycled to date, and describes the wood as reclaimed rather than virgin timber.

  3. 03

    The groove and the clip

    The groove is not decorative. Grooved-edge boards accept the Trex Hideaway hidden fastening system — a glass-filled-nylon Universal Fastener that seats in the side channel and screws to the joist, leaving the surface unbroken. The clip's geometry establishes the designated board gap automatically. Trex sells the fasteners by coverage: 50-square-foot boxes and 500-square-foot buckets, plus starter and butt-joint clips.

  4. 04

    The joist line

    Trex decking is a walking surface, not structure — the installation guide bars structural applications and calls for code-approved framing. Joists run 16 inches on center for residential 1-inch boards, 12 inches for 200-psf commercial duty, tighter for angled patterns, and every board must span at least three joists. A black-painted joist top disappears between gapped boards — Trex's own tip.

  5. 05

    The gaps

    The daylight between boards is engineered. Width-to-width: 3/16-inch minimum, 3/8 inch on docks and wooded sites, never past 1/2 inch. Board ends: 1/8 inch above 40°F at install, 3/16 inch below. Against walls: 1/4 inch above 40°F, 1/2 inch below. Overhang stops at 3/4 inch. The gaps drain water, absorb thermal movement and let the wood joists underneath shrink.

Stylized CGI rendering — an illustration of deck assembly, not a Trex drawing.

The lines, explained

Transcend. Select. Enhance.

Three lines, one recipe — the difference is the shell, the palette, and the warranty term. The cards keep score.

50-yr

Trex Transcend & Transcend Lineage

The Best tier. Transcend, on the market since January 2010, carries a deep wood-grain shell in multi-tonal colors and is described by Trex as curveable for bent-deck work. Transcend Lineage, added in 2022, is engineered, per Trex, with heat-mitigating technology to run cooler than comparable composite colors. Both use the full 1-inch profile — .94 by 5.5 inches actual — in 12-, 16- and 20-foot grooved lengths, under a 50-year limited residential warranty.

FitsBest tier · full 1-in profile

35-yr

Trex Select

The Better tier. Select is the budget-conscious capped composite, in curated colors — Pebble Grey and Saddle in the current install guide. Boards run a 7/8-inch nominal profile, .82 by 5.5 inches actual, in 12-, 16- and 20-foot grooved lengths, and share the standard 16-inch residential joist spacing. The warranty is 35-year limited residential — raised from 25 years in Trex's 2023 restructuring.

FitsBetter tier · 7/8-in profile

25-yr

Trex Enhance

The Good tier, positioned by Trex as the budget-minded, worry-free alternative to wood. Enhance boards are scalloped underneath, which trims weight while keeping the capped shell; select colors carry heat-mitigating technology. Two color families — Naturals and Basics — share the 1-by-6 nominal profile in 12-, 16- and 20-foot grooved lengths. The warranty is 25-year limited residential, 10-year commercial.

FitsGood tier · scalloped profile

Install-guide physics: residential 1-in Trex boards require joists 16 in on center (12 in for 200-psf commercial; 4 in tighter at 45°), a minimum 3/16-in side-to-side gap, 1/8-in end gaps above 40°F (3/16-in below), 1/4–1/2 in at walls, and 3/4-in maximum overhang. Improper gapping and non-recommended fasteners are explicit Trex warranty exclusions.

Read the number

Reading a Trex item number

Trex's installation guide prints the item-number grammar for every current board. Specimen: a Tiki Torch Transcend deck board.

TT ··· T

Color, then collection

The leading letters are the color code — TT is Tiki Torch; Rainier is RN, Pebble Grey is PG, Foggy Wharf is FW. The letter block after the length names the collection: N for Signature, TL for Transcend Lineage, T for Transcend Tropicals, T2 for Transcend Earth Tones, S for Select, E2 for Enhance Naturals and Basics. The same grammar runs across every current line.

01 06 16

Profile × width × length

Read the digits straight through: nominal 1 inch thick, 6 inches wide, 16 feet long. Grooved boards ship in 12-, 16- and 20-foot lengths across every line. Actual dimensions run thinner than nominal — .94 by 5.5 inches for Signature, Transcend and Enhance; .82 by 5.5 inches for Select's 7/8-inch profile. Whatever the length, a board must bear on at least three joists.

G

The edge is the fastening system

G is a grooved edge: the side channel takes Trex Hideaway hidden fasteners, the walking surface stays unbroken, and the clip itself sets the required gap. S is a square edge: face-fastened with Trex-recommended composite screws, the usual choice for perimeters, stairs and picture-frame borders — and routable for clips later, per the guide. The letter decides your fastener order.

Whatever the suffix, the physics is fixed: 16-inch on-center joists for residential 1-inch boards, tighter spans for angled patterns, gapping per the installation guide. The trailing digits are not documented in the guide and are left unread here.

The desk's read

How the desk checks a decking order

The order logic nobody writes down — voiced as our desk's read, not the brand's claim.

Pick the line by tier, not by color

The desk's read: Trex prices its ladder plainly — Enhance, Select, Transcend and Lineage, each step buying a fuller profile and a longer warranty: 25, 35, 50 years. Decide the tier first, against how long you will own the deck; then pick the color. Every tier shares the same joist spacing and, per Trex, the same 95%-recycled core — the structure underneath does not change with the budget.

Do the span math before the cart

The desk's read: sketch the joist layout first. Residential 1-inch boards want 16-inch on-center framing, every board across at least three joists, and a 45-degree pattern tightens spans by 4 inches. Then buy lengths to the layout — boards come in 12, 16 and 20 feet so field boards can run joint-free. Butt joints cost clips, blocking and looks; the cheapest fix is choosing the right length.

Gapping is a warranty term, not a style choice

The desk's read: the install guide's gaps are conditions of coverage — Trex's warranty explicitly excludes conditions traced to improper gapping. Cold-day installs need more room at the ends, not less: 3/16 inch below 40°F against 1/8 above. Leave the wall gap, keep overhangs under 3/4 inch, and resist closing gaps for looks; the boards will move whether or not you left room for it.

Order the system, not just boards

The desk's read: a grooved-edge order is not complete without Trex Hideaway fasteners — sold by coverage in 50-square-foot boxes or 500-square-foot buckets — plus a starter clip for the first course and butt-joint clips where boards meet. Square-edge boards need Trex-recommended composite screws instead. Price the fastening system with the decking; conditions attributable to non-recommended fasteners sit outside the warranty.

Measured the deck but not sure about boards versus clips? Put it on a list and let a specialist run the math. Paste the list, however you have it

The working collection

The board bench

The three lines and the fascia that closes them

Shop all Trex at Super Arbor

Styled visualization of an evening backyard deck in warm brown composite boards under string lights
Styled visualizationA deck is the room without a ceiling. Trex has made its boards in Winchester, Virginia since 1996 — from reclaimed wood and recycled film, per the company's own recycling ledger.

Illustrative production study, not a photograph of the maker's own facility.

Asked at the desk

Questions, answered plainly

What is Trex decking made of?

Per Trex, its composite decking is made from 95% recycled and reclaimed materials: reclaimed wood fiber and recycled polyethylene plastic film drawn from post-consumer, post-commercial and post-retail streams. The company states it has recycled more than 5.5 billion pounds of plastic film to date. All current lines are capped — a bonded outer shell protects the composite core.

What joist spacing does Trex decking require?

Per the Trex installation guide, 1-inch boards — and 7/8-inch Select boards — require joists at 16 inches on center for residential decks, and 12 inches on center for commercial decks rated at 200 psf. Angled installs tighten the span: 4 inches less at 45 degrees. Every board must bear on at least three joists, and Trex decking itself is not structural.

What is the difference between grooved-edge and square-edge Trex boards?

Grooved-edge boards have a side channel that accepts the Trex Hideaway hidden fastening system, so no screws show on the walking surface and the clip sets the board gap. Square-edge boards are fastened through the face with Trex-recommended composite deck screws — the usual choice for perimeters and stairs — and, per the install guide, can be routed to take hidden fasteners.

How long is the Trex decking warranty?

Under the Trex Decking, Fascia & Cladding Limited Warranty, residential coverage runs 50 years for Transcend and Transcend Lineage, 35 years for Select and 25 years for Enhance; commercial decking coverage is 10 years. Fade is covered beyond 5 Delta E (CIE) units of color change for the first 25 years — beyond 15 Delta E units for the remainder of the term — and stain coverage applies to food and beverage spills cleaned within one week.

What gaps does Trex decking need between boards?

Per the Trex installation guide: minimum 3/16 inch side-to-side (3/8 inch on docks and heavily wooded sites, never more than 1/2 inch); 1/8 inch end-to-end when installed above 40°F and 3/16 inch below; and 1/4 inch (above 40°F) to 1/2 inch (below 40°F) wherever decking abuts a wall or solid object. Maximum perpendicular overhang is 3/4 inch. Improper gapping is an explicit warranty exclusion.

Which Trex line stays coolest in the sun?

Per Trex, Transcend Lineage is engineered with heat-mitigating technology in its shell to reflect the sun and run cooler than other composite offerings in similar colors — the company calls it its coolest decking yet. Select colors of Enhance carry the same technology. These are the brand's own performance descriptions, published on its product pages and launch releases.

The hall closes. The deck stays out in it.

The Trex lines above are live catalog — priced in the open, the same number for everyone. Decking is a coverage buy: send the deck plan — however you have it — and a human specialist prices every line and checks the math.

Sources: Trex corporate pages (trex.com/our-company, eco-friendly decking); Trex product pages (products/decking); 2024 Trex Decking Installation Guide (images.trex.com); Trex Decking, Fascia & Cladding Limited Warranty (2023); Trex press releases 2010–2023; Trex investor relations and SEC filings. Era and anatomy imagery: styled visualizations, not archival photographs or Trex drawings.

Trex®, Transcend®, Lineage™, Enhance®, Select®, Signature® and Trex Hideaway® are trademarks or registered trademarks of Trex Company, Inc., Winchester, VA. Super Arbor is an independent retailer; brand marks remain the property of their respective owners.

Independent retailer · the brand's own record, cited at the foot of the pageNext: TimberTech