Skip to content
Zip System Flashing Tape 3-3/4 in. x 90 ft. Roll for Wall and Window Sealing
Regular price $582.01Zip System Flashing Tape 3-3/4 in. x 90 ft. Roll for Wall and Window Sealing
Zip System Flashing Tape is a self-adhering window, door and wall penetration flashing membrane supplied as a 3-3/4 in. x 90 ft. roll. It seals seams and penetrations in the Zip System sheathing and tape approach to exterior wall sealing. Pair it with Zip System sheathing and liquid flashing products for a continuous wall assembly.
Key Features:
- Wide seam coverage: The 3-3/4 in. tape width covers wall seams and flashing transitions with a single pass.
- Long roll length: Each roll runs 90 ft., covering roughly 67.5 sq. ft. of 3-3/4 in. wide flashing.
- Window and door use: Designed for window, door and wall penetration flashing membranes per its product category.
- Self-adhering membrane: Tape flashing bonds directly to the substrate as part of the Zip System wall assembly.
- System matched: Intended for use with Huber Zip System sheathing and related wall sealing products.
- Single roll unit: Sold as one roll, making it easy to order exactly the length a job needs.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | ZIP System |
| Sell unit | 1 roll, 3-3/4 in. x 90 ft. |
| Product line | Zip System Flashing Tape |
| Nominal size | 3-3/4 in. x 90 ft. |
| Length | 90 ft. |
| Width | 3-3/4 in. |
| Coverage per unit | Approximately 67.5 linear ft. of 3-3/4 in. wide flashing per roll |
| Intended use | Window, door and wall penetration flashing membrane |
Coverage & How Much You Need:
One roll provides 90 linear ft. of 3-3/4 in. wide flashing tape, about 67.5 sq. ft. of coverage. Estimate roll count from the total linear footage of seams, window and door perimeters, dividing by 90 ft. per roll and allowing a small waste margin.
Fit and Compatibility:
Formulated for the Huber Zip System wall sheathing and flashing lineup, where it seals seams and penetrations in the same wall assembly. Zip System sheathing and any liquid or liquid-applied flashing products are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in the sell unit?
A: One roll of Zip System Flashing Tape measuring 3-3/4 in. x 90 ft.
Q: How much area does one roll cover?
A: A 90 ft. roll at 3-3/4 in. wide covers roughly 67.5 sq. ft. of seam or flashing area.
Q: Where is this tape used?
A: It is a window, door and wall penetration flashing membrane used to seal seams and penetrations.
Q: Does it work with regular house wrap?
A: It is made for the Zip System wall assembly; check the manufacturer for use on other substrates.
Q: What tools are needed for installation?
A: Standard tape flashing installation calls for a clean substrate, a roller to press the tape down and a utility knife for cuts.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Match the tape width to the seam or flange you are covering: 3-3/4 in. gives good margin over typical sheathing seams and window flange laps. Roll the tape firmly after placement to work out wrinkles and ensure full adhesion, and keep the substrate dry and dust-free. For wide gaps or complex penetrations, pair the tape with the matching Zip System liquid flashing product.
Follow the manufacturer's installation instructions and local building code requirements for wall and window flashing, and use care when working from ladders or scaffolding.
Order Zip System Flashing Tape in the 3-3/4 in. x 90 ft. roll to seal your wall seams and penetrations.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
