Wilsonart Y0867 Tangerine Virtual Laminate Sheet 48 in. x 96 in., Matte Finish, Postforming Grade

Wilsonart Tangerine is a directional, wavy-pattern decorative laminate in a saturated orange, supplied as a 48 in. x 96 in. sheet in Matte finish on postforming-grade HPL. One sheet per order. Pair it with a particleboard or MDF substrate for bright countertops, bars and accent tops.

Key Features:

• Saturated orange: A bold, saturated orange colorway for high-energy interiors.
• Directional wave pattern: A directional, wavy design that must run one way across all pieces.
• Matte finish: 60 Matte Finish delivers a low-sheen surface.
• Postforming grade: VDL postform HPL suits rolled edges on horizontal surfaces.
• Shop-friendly size: The 48 in. x 96 in. sheet is easy to handle and machine.

Specifications Table:

Coverage & How Much You Need:

One 48 in. x 96 in. sheet yields 32 square feet, fitting a smaller countertop, bar top or desk. Since the wave pattern is directional, cut all pieces for a job from the sheet with the same grain direction.

Fit and Compatibility:

Bond with contact adhesive to a particleboard or MDF core and add a backer laminate underneath to balance the panel. This is a specialty virtual laminate design; edge band and vertical-grade versions, if needed, should be confirmed separately.

Frequently Asked Questions (FAQ):

Q: What does one order include?
A: One 48 in. x 96 in. Wilsonart Tangerine laminate sheet in 60 Matte finish, postforming grade; adhesives and substrate are not included.

Q: Is this suitable for a rolled countertop edge?
A: Yes, the 372 VDL postform grade is specifically for horizontal surfaces with postformed, rolled edges.

Q: How should the pattern be oriented?
A: Tangerine has a directional, wavy pattern, so keep the direction consistent on all pieces and check alignment before applying adhesive.

Q: Will the orange finish show scratches?
A: Any matte decorative laminate can show wear; use cutting boards and trivets and clean with non-abrasive cleaners as with standard HPL.

Q: Can I use it on a vertical wall panel?
A: This postform grade is intended for horizontal work; choose a vertical grade in this design for cabinet sides and wall surfaces.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Saturated solid-color laminates show seam lines more than patterns, so place seams in the least visible spot and keep the wave direction matched. Cut with a fine-tooth, negative-hook blade to prevent chipping the orange face, and roll the surface down thoroughly after contact-adhesive bonding. Always back the substrate with a balancing sheet before postforming.

Fresh-cut laminate edges are sharp and contact adhesive is flammable, so wear gloves and eye protection and bond only in a ventilated area away from ignition sources.

Bring home Wilsonart Tangerine laminate for a vivid orange countertop with flowing waves.