Wilsonart Y0706K Grey Plywood Virtual Laminate Sheet 60 in. x 144 in., Softgrain Finish, Postforming Grade

Wilsonart Grey Plywood is a large-scale plywood-inspired decorative laminate in a two-tone grey colorway, supplied as a 60 in. x 144 in. sheet in Softgrain finish on postforming-grade HPL. One sheet covers the order. Bond it to a particleboard or MDF substrate for countertops with rolled edges or other horizontal work.

Key Features:

• Plywood-look design: A large-scale plywood-inspired print rendered in a two-tone grey colorway.
• Generous sheet size: Ships as a 60 in. x 144 in. sheet, giving long uninterrupted runs for countertop fabrication.
• Softgrain texture: The 12 Softgrain finish adds a subtle tactile grain to the surface.
• Postforming grade: VDL postform HPL is made for rolled, curved edges on horizontal surfaces.
• Large design repeat: Design repeat is 62 in. wide x 48 in. long, so plan seams around the pattern.
• Special order: A special-order laminate; if not in stock locally, allow approximately a 2-week lead time.

Specifications Table:

Coverage & How Much You Need:

One sheet measures 60 in. x 144 in., or 60 square feet, enough for a typical countertop run with allowance for a formed front edge and cutout waste. Because the design repeat is 62 in. x 48 in., lay out seams before cutting to keep the plywood pattern aligned.

Fit and Compatibility:

Bond with contact adhesive to a 45 lb particleboard or medium-density fiberboard core for postformed countertops, and use matching backer laminate on the underside to balance the panel. This design is a specialty virtual laminate, so confirm the Softgrain finish pairs with your edge profile before fabrication.

Frequently Asked Questions (FAQ):

Q: What is included with this item?
A: One 60 in. x 144 in. Wilsonart Grey Plywood laminate sheet in 12 Softgrain finish, postforming grade. Adhesive, substrate and backer sheet are sold separately.

Q: What surfaces is this grade made for?
A: The 372 VDL postform grade is intended for horizontal surfaces such as countertops where the edge is rolled over with a postforming machine.

Q: Can I use it on cabinet sides or walls?
A: This sheet is postform grade; for vertical surfaces a vertical-grade sheet is typically recommended, so check other grades of this design if your project is vertical work.

Q: How should I handle the seam with this pattern?
A: The design repeat is 62 in. x 48 in., so dry-fit and mark both pieces before cutting so the plywood grain lines up across the joint.

Q: How long does delivery take?
A: This is a special-order laminate; if it is not in stock locally, allow approximately a 2-week lead time.

Q: Can I cancel a special order?
A: Special-order laminate can be cancelled within a 24-hour window, so confirm sizes before ordering.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For a postformed edge, choose a compact-radius edge profile and test the Softgrain finish on a scrap to confirm it forms without cracking. Always laminate a balancing backer to the underside of the substrate to prevent warp, and let the sheet acclimate flat in the shop before gluing. With the 62 in. x 48 in. repeat, position seams in low-visibility areas and color-match at the joint.

Cut laminate edges are sharp and bonding dust is an irritant, so wear cut-resistant gloves, eye protection and a dust mask when trimming and routing, and follow contact-adhesive ventilation precautions.

Order Wilsonart Grey Plywood postforming laminate today for a distinctive plywood-look countertop in two-tone grey.