Wilsonart Windsor Mahogany 7039K High-Pressure Laminate Sheet - Premium Finish Woodgrain Surfacing

Wilsonart 7039K Windsor Mahogany is the premium-finish version of the traditional mahogany design with large cathedrals, medium red-brown color, golden undertones and dark ticking. One order unit is one sheet; this page sells 31 variants in 6 premium finishes, 4 grades and 8 sheet sizes. Pair with a balanced backer sheet when bonding to particleboard or MDF.

Key Features:

• Six premium finishes: Choose 01 High Gloss, 07 Textured Gloss, 12 Softgrain, 78 Fine Grain, or the High Gloss and Textured Gloss plus Fine Grain versions with protective film.
• Gloss performance surfaces: High Gloss and Textured Gloss finishes deliver a polished, light-reflecting surface for cabinet fronts and feature panels.
• Four working grades: Grades cover 107 Standard HPL for horizontal work, 350 Postform for rolled edges, 335 Vertical for cabinet sides, and 735 RE-COVER Vertical for resurfacing.
• RE-COVER option: 735 RE-COVER Vertical HPL is designed for relaminating over existing vertical surfaces in refacing projects.
• Eight sheet sizes: Sheet sizes from 30 in. x 144 in. up to 60 in. x 144 in., including 48 x 96 and 60 x 96 stock sizes.
• Film-protected options: Plus-Film items ship with a surface film that protects gloss faces during handling and fabrication.
• Same mahogany design: Traditional mahogany pattern with large cathedrals and dark ticking throughout a medium red-brown tone.

Specifications Table:

Coverage & How Much You Need:

A 48 in. x 96 in. sheet yields 32 square feet of decorative surface before trimming; a 60 in. x 144 in. sheet yields 60 square feet. Size your order by laying out doors, drawer fronts and panels on the sheet to minimize waste, and add a backer sheet for each face-bonded panel.

Fit and Compatibility:

Bonds to particleboard or MDF with contact adhesive for countertops and casework; postforming grade items suit rolled-edge fabrication. 735 RE-COVER Vertical HPL is intended for overlaying existing vertical laminate surfaces. Backers and adhesives sold separately.

Frequently Asked Questions (FAQ):

Q: What does one order include?
A: One sheet in your selected finish, grade and size from the 31 listed variants; adhesives, backer sheets and substrate are sold separately.

Q: Which finish is best for high-traffic doors?
A: 78 Fine Grain or 12 Softgrain are low-sheen working finishes, while 07 Textured Gloss offers gloss with texture; High Gloss gives the strongest reflection but shows handling more.

Q: What is RE-COVER used for?
A: 735 RE-COVER Vertical HPL is made for relaminating over existing vertical laminate surfaces, such as refacing cabinet ends or wall panels.

Q: Can I postform a rolled edge with this design?
A: Yes, order the 350 Postform HPL grade; keep the bend radius within your equipment's capacity and follow the adhesive temperature window.

Q: Is this in stock or special order?
A: It is a special-order, non-standard option; allow approximately a 2-week lead time if not stocked locally, with a 24-hour window to cancel.

Q: How should I store large sheets?
A: Store flat, face protected, and let sheets acclimate in the shop before cutting and gluing.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For glossy K-series finishes, always leave the protective film on until after final cleanup, and use a balanced backer on every face-bonded panel to keep gloss tops flat. Handle 60 x 144 sheets with two people and a panel carrier. Match finish across postform edges and vertical panels by ordering the same finish code, and pick RE-COVER grade when a client wants a refinish rather than replacement.

Wear cut-resistant gloves and eye protection when cutting laminate, and support large sheets fully so they do not crack or snap during handling.

Order your Wilsonart 7039K Windsor Mahogany sheet in a premium gloss, softgrain or fine grain finish today.