Wilsonart Wallaby D439K High Gloss Finish Laminate Sheet

Wilsonart D439K Wallaby is a solid off-white high-pressure laminate design offered in four finishes including high gloss and textured gloss, across standard, vertical and postforming grades with ten variants. Each order unit is 1 sheet in the size you select. Bond to a balanced particleboard or MDF substrate for finished horizontal or vertical surfaces.

Key Features:

• Solid off-white color: Wallaby is a solid off-white laminate design suited to clean, neutral interiors.
• Four finish choices: Finishes are 01 High Gloss (with or without film), 07 Textured Gloss and 18 Linearity.
• Three core grades: Offered in 107 Standard HPL, 335 Vertical HPL and 350 Postform HPL.
• Postforming ready: 350 Postform HPL variants support rolled front edges on countertops.
• Three sheet sizes: Available in 48 in. x 96 in., 48 in. x 120 in. and 60 in. x 144 in.
• Gloss with film: A High Gloss Finish + Film option is offered in all three grades.

Specifications Table:

Coverage & How Much You Need:

One sheet covers up to 60 in. x 144 in. (60 sq ft) at the largest size, or 32 sq ft at 48 in. x 96 in. Plan your cut list within the sheet dimensions and allow for trim and seams.

Fit and Compatibility:

Bonds to particleboard, MDF or plywood with contact adhesive and pairs with a matching laminate backer sheet on undersides. Postforming grade works with postforming equipment; edge banding and substrate are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One laminate sheet in your chosen finish, grade and size; adhesive, substrate and edge materials are not included.

Q: Which grades are offered?
A: 107 Standard HPL for horizontal surfaces, 335 Vertical HPL for cabinet sides and walls, and 350 Postform HPL for rolled countertop edges.

Q: What sizes can I order?
A: Three sizes are printed: 48 x 96, 48 x 120 and 60 x 144 inches.

Q: Is the high gloss hard to keep clean?
A: The 01 High Gloss variants, including one with a protective film, are listed for this design; gloss surfaces show smudges more than textured finishes like 07 Textured Gloss.

Q: Is this a stock item?
A: It is listed as special order with an approximate 2-week lead time if not stocked locally and a 24-hour cancellation window.

Q: Do I need a backer sheet?
A: Yes, bonding a laminate backer to the underside of the substrate is standard practice to keep the panel balanced and flat.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Gloss finishes demand clean, simultaneous seam cuts because every flaw shows; consider a full-size 60 in. x 144 in. sheet to eliminate seams on standard-depth runs. Use the 335 Vertical grade on cabinet ends and walls where postforming is not needed. Acclimate sheets in the shop at least 48 hours before gluing to minimize dimensional movement.

Handle large sheets with two people and wear gloves when cutting, as laminate edges and contact adhesive operations can cause cuts and require ventilation.

Order Wilsonart D439K Wallaby laminate in your preferred finish and size.