Skip to content
Wilsonart Pewter Brush 4779-60 High-Pressure Laminate Sheet, Matte Finish
Regular price $69.26Orders start at $399 — combine any items to reach the minimum. Learn more
Wilsonart Pewter Brush 4779-60 High-Pressure Laminate Sheet, Matte Finish
Wilsonart Pewter Brush 4779-60 is a high-pressure laminate sheet with a large scale swirling brush effect in a pewter grey design, offered here in the 60 Matte Finish. Each order is 1 sheet in the grade and size you select. Pair it with matching Wilsonart vertical or postform grades for a coordinated countertop, cabinet and wall installation.
Key Features:
- Swirling brush design: A large scale swirling brush effect rendered in a pewter grey laminate design.
- Matte finish: Supplied in the 60 Matte Finish option of this design.
- Standard HPL grade: Listed under Wilsonart standard high-pressure laminate sheets for general surfacing use.
- Fabricator friendly: Bond to particleboard or MDF substrates with contact adhesive using standard laminate fabrication methods.
- Sheet format: Sold as individual laminate sheets so you can order only the material your layout needs.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Wilsonart |
| Manufacturer model | 4779-60 |
| Sell unit | 1 sheet |
| Design number | 4779-60 |
| Design name | Pewter Brush |
| Available finishes | 60 Matte Finish |
| Available grades | 107 Standard HPL |
| Material | High-pressure laminate (HPL) |
| Surface / pattern | Large scale swirling brush effect in pewter grey |
| Category | Standard HPL sheets |
| Recommended use | General purpose horizontal surfacing |
Coverage & How Much You Need:
Coverage depends on the sheet size selected; a 48 in. x 96 in. sheet covers 32 sq. ft. before allowance for trim. Add 10-15% for cutouts, seams and edge banding when sizing a countertop job.
Fit and Compatibility:
Part of the Wilsonart laminate line; pair with Wilsonart 335 Vertical, 350 Postform or 568 Compact grades of the same design where listed for matching edges, backsplashes and cabinet sides. Substrate, contact adhesive and backer sheets are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One Wilsonart 4779-60 Pewter Brush laminate sheet in the 60 Matte Finish at the grade and size listed.
Q: What size sheet should I buy?
A: Choose a sheet that covers your finished top plus overhang, allowing extra for cutouts and seam trimming.
Q: How is this laminate installed?
A: It is bonded to a flat substrate such as particleboard or MDF with contact adhesive, then trimmed and edges finished.
Q: Is this the same design as the multi-finish Pewter Brush listing?
A: Yes, it is the same 4779 Pewter Brush design; this page covers the 4779-60 matte finish standard HPL listing.
Q: Do I need a backer sheet?
A: A balancing backer laminate on the underside of the substrate helps prevent warping and is standard shop practice.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Pewter Brush's directional swirling pattern rewards careful grain direction: run sheets the same way across a run of tops so the brush effect lines up at seams. Use a balancing backer on MDF or particleboard cores and roll the sheet thoroughly after contact cement application to avoid voids. For rolled front edges, check the postforming grade version of this design instead of standard HPL.
Support large sheets fully when handling and wear eye protection and a dust mask when cutting laminate.
Order Wilsonart Pewter Brush 4779-60 laminate sheet today for a pewter grey brushed finish on your next countertop.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
