Wilsonart Natural Rift 7954K High-Pressure Laminate Sheets, Light Rift-Cut Oak Woodgrain, Multiple Finishes, Grades and Sheet Sizes

Wilsonart Natural Rift is a high-pressure laminate design with the look of light, rift-cut oak and subtle planking, finished in an overall natural coloration with tan graining. Offered in Fine Grain, Softgrain, Linearity and Textured Gloss finishes across Vertical and Postform grades in sheet sizes from 36 in. x 96 in. up to 60 in. x 144 in. Each order unit is one laminate sheet, bonded to a particleboard or MDF substrate at fabrication.

Key Features:

• Rift-cut oak look: The design reads as a light, rift-cut oak with subtle planking and tan graining for a natural, contemporary wood aesthetic.
• Multiple finishes: Available in 07 Textured Gloss, 12 Softgrain, 18 Linearity and 78 Fine Grain finishes to match the desired sheen and feel.
• Two grades: Offered in 335 Vertical HPL for cabinet sides and wall surfaces and 350 Postform HPL for rolled-edge countertop work.
• Four sheet sizes: Sheet size choices include 36 in. x 96 in., 48 in. x 96 in., 60 in. x 120 in. and 60 in. x 144 in.
• Postform ready: The 350 Postform grade is made for heat-forming over a rounded countertop edge with a standard postforming radius.
• Special order: This is a non-standard special order option; if not in stock locally, delivery takes approximately 2 weeks.

Specifications Table:

Coverage & How Much You Need:

One sheet covers up to 60 sq. ft. at 48 in. x 96 in. or 90 sq. ft. at 60 in. x 144 in.; size your job by laying out parts to minimize waste and allow a small trim margin on each edge.

Fit and Compatibility:

Bond to standard particleboard or MDF core material with contact adhesive, and pair with matching Wilsonart backer sheets on the underside of countertops to balance the panel. This design page covers 9 finish, grade and size variants; select the combination you need at checkout.

Frequently Asked Questions (FAQ):

Q: What is included with my order?
A: One Wilsonart Natural Rift laminate sheet in the finish, grade and sheet size you select. Substrate, adhesive and backer sheets are sold separately.

Q: Which grade should I choose?
A: Choose 350 Postform HPL for countertops with rolled front edges and 335 Vertical HPL for cabinet ends, doors and wall surfaces.

Q: What sheet sizes are available?
A: The design is offered in 36 in. x 96 in., 48 in. x 96 in., 60 in. x 120 in. and 60 in. x 144 in. sheets, with sizes varying by finish and grade.

Q: How do I install it?
A: Cut with a panel saw or router, apply contact adhesive to both the sheet and substrate, and roll or press firmly for full bond. Use a backer sheet on the underside of countertop panels to help prevent warping.

Q: How long does delivery take?
A: This is a special order non-standard option; if not in stock locally, allow approximately 2 weeks for delivery, with a 24-hour window to cancel the special order.

Q: Is this fire rated or chemical resistant?
A: No fire rating or chemical resistance is stated in the sources for this design; the grades listed are Vertical and Postform HPL only.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

As a fabricator, I would spec Natural Rift in 350 Postform grade when the countertop needs a rolled front edge, and in 335 Vertical grade for cabinet ends and wainscot where no postforming is required. Balance countertop panels with a backer sheet and keep parts off the substrate edge by at least 1/8 in. to avoid chipping. The 60 in. wide sheets help run full-depth counter runs with fewer seams, but two people should handle sheets this size.

Wear cut-resistant gloves, eye protection and a dust mask when cutting or routing laminate; cut edges and chips are sharp.

Order Wilsonart Natural Rift high-pressure laminate sheets in your choice of finish, grade and sheet size today.