Wilsonart Milano Brown Granite Laminate Sheet 4725, Matte Finish, Multiple Grades and Sizes

Wilsonart 4725 Milano Brown is a medium-scale granite high-pressure laminate in mid tones of warm brown and rust over a light beige background, balanced with brown and black hues. Each order is 1 sheet, available in 60 Matte finish across Standard, Vertical, Postform and Chemsurf HPL grades in sizes from 30 x 96 in. up to 60 x 144 in. Pair it with a matching backer sheet on undersurfaces to keep panels flat.

Key Features:

• Granite look: Medium-scale granite design with warm brown and rust mid tones on a light beige background.
• Balanced hues: The pattern balances brown and black hues against the beige field for depth.
• Four grades: Offered in 107 Standard, 335 Vertical, 350 Postform and 390 Chemsurf HPL grades.
• Nine sheet sizes: Available in sheet sizes ranging from 30 x 96 in. to 60 x 144 in.
• Matte surface: Listed in the 60 Matte Finish for a low-sheen working surface.
• Design repeat: Approximate design repeat is 49 in. long by 31 in. wide for seam planning.

Specifications Table:

Coverage & How Much You Need:

One sheet covers up to 60 x 144 in. (60 sq. ft.) in the largest size; plan seams around the approximate 49 x 31 in. design repeat so the pattern aligns at joints.

Fit and Compatibility:

This is a surfacing laminate for bonding to approved substrates such as particleboard or MDF with contact adhesive; substrates, backer sheets and adhesives are sold separately. Grade 350 Postform sheet is intended for rolled-edge fabrication, while 390 Chemsurf suits chemical-exposed work surfaces.

Frequently Asked Questions (FAQ):

Q: What is included with one order?
A: One laminate sheet in the finish, grade and size you select; adhesive, substrate and backer sheets are sold separately.

Q: Which grade should I choose for a countertop?
A: Use 107 Standard HPL for flat horizontal work, 350 Postform HPL when you want a rolled front edge, and 335 Vertical HPL for cabinet sides and wall surfaces.

Q: What is the Chemsurf grade for?
A: 390 Chemsurf HPL is the chemical-resistant grade intended for laboratory and other work surfaces exposed to chemicals.

Q: How do I avoid visible seams?
A: Size the job so seams fall where the approximate 49 in. x 31 in. design repeat can be matched, and order the largest sheet that fits your run.

Q: Is this item always in stock?
A: It is a special-order non-standard option; if not stocked locally, allow approximately a 2-week lead time, and cancellations must be made within a 24-hour window.

Q: What substrate should I bond it to?
A: Laminate is typically bonded to particleboard or MDF using contact adhesive, with a balancing backer sheet on the underside to help prevent warping.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Choose 107 Standard for flat countertops, 350 Postform when the fabricator will roll the front edge, 335 Vertical for cabinet ends and 390 Chemsurf where lab-grade chemical resistance is needed. Order the largest sheet your router table and shop can handle to minimize seams, and always bond a backer sheet to the underside of horizontal panels to balance stress. Rough-cut sheets slightly oversized, bond with contact adhesive, then trim flush and file the edge for a clean reveal.

Cut laminate edges are sharp and dust is abrasive, so wear cut-resistant gloves, eye protection and a dust mask when cutting and routing.

Order Wilsonart 4725 Milano Brown laminate in the grade and sheet size your next countertop or casework job needs.