Wilsonart Green Tigris 4667 High-Pressure Laminate Sheets, Matte Finish, Multiple Grades and Sizes

Wilsonart Green Tigris 4667 is a medium scale fiber high-pressure laminate with a green background overlaid with large white fibers and smaller blue-green fibers, offered in a 60 Matte Finish. It is listed in eight grades including standard, high wear, vertical, postform, Chemsurf, compact and fire-rated vertical, in sizes from 30 in. x 96 in. up to 60 in. x 144 in., sold as 1 sheet. Pair with particleboard or MDF substrate and contact adhesive.

Key Features:

• Fiber design: Medium scale fiber pattern with a green background, large white fibers and smaller blue-green fibers.
• Matte surface: Offered in the 60 Matte Finish across all listed variants.
• Eight grades: Available in Standard, Standard High Wear, Vertical, Postform, Postform High Wear, Chemsurf, Compact and Fire Rated Vertical grades.
• Wide size range: Thirteen sheet size options from 30 in. x 96 in. up to 60 in. x 144 in., including 1/2 in. compact panels.
• High wear option: Standard and postform high wear grades are listed for demanding horizontal applications.
• Compact panels: Self-supporting 568 Compact HPL panels are listed in 1/2 in. thickness.
• Special order: Non-standard special order; allow approximately a 2-week lead time if not in stock locally.

Specifications Table:

Coverage & How Much You Need:

One sheet covers its full listed dimension; a 48 in. x 96 in. sheet covers 32 square feet and a 60 in. x 144 in. sheet about 60 square feet before trim loss. Plan parts with trimming allowance and position seams on long runs.

Fit and Compatibility:

Bond to dimensionally stable 45 lb particleboard or MDF with contact adhesive and balance with a backer sheet underneath. Exposed edges require edge treatment; the 568 Compact panels can be used self-supporting without a substrate.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One laminate sheet in your chosen finish, grade and size; substrate, adhesive and edge banding are sold separately.

Q: Which grade should I use for a countertop?
A: 107 Standard HPL or 350 Postform HPL for horizontal work; choose the high wear versions for heavy use and 350 Postform for rolled edges.

Q: Can this be used on walls and cabinet sides?
A: Yes, the 335 Vertical HPL grade is intended for vertical surfaces such as cabinet sides, doors and wall panels.

Q: What is the lead time?
A: It is a special order, non-standard option; if not in stock locally allow approximately a 2-week lead time, with a 24-hour window to cancel.

Q: How thick are the compact panels?
A: The 568 Compact HPL items are listed in 1/2 in. thickness as printed.

Q: Is there a chemical-resistant option?
A: Yes, the 390 Chemsurf HPL grade is listed in multiple sheet sizes for chemical-resistant applications.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

This directional fiber pattern rewards careful grain alignment across adjacent pieces, so cut all parts from the same sheet where possible and keep seams consistent. Use postforming grade with a correctly radiused substrate for rolled edges, or standard grade for square-edge fabrication with a balancing backer underneath. Chemsurf is the right pick where cleaning chemicals are routine. Large 60 in. x 144 in. sheets are heavy; use two installers or a panel carrier to prevent flex cracks.

Wear gloves and eye protection when cutting and routing laminate; sheet edges and offcuts are sharp, and contact adhesives require good ventilation.

Order Wilsonart Green Tigris 4667 laminate in the grade and sheet size for your project.