Wilsonart Fusion Maple 7909K High-Pressure Laminate Sheet, Multiple Finishes, Grades and Sheet Sizes

Wilsonart Fusion Maple design 7909K is a maple-pattern high-pressure laminate sheet with cathedral grain and slight anigre figure, showing a soft natural blond tone with subtle pink and green undertones. The page lists 25 variants across 4 finishes, 3 grades and 7 sheet sizes, sold as a single sheet per order unit. Pair it with a particleboard or MDF substrate and matching edge banding for countertops and casework.

Key Features:

• Maple cathedral grain: The design shows maple cathedrals with a slight anigre figure for a classic natural wood look.
• Soft blond tone: Overall color is a soft natural blond with slight pink and green undertones.
• Four finish choices: Available in 01 High Gloss, 01 High Gloss with film, 07 Textured Gloss and 78 Fine Grain finishes.
• Three grade options: Offered in 107 Standard HPL, 335 Vertical HPL and 350 Postform HPL grades.
• Seven sheet sizes: Sheet sizes run from 36 in. x 96 in. up to 60 in. x 144 in. to minimize seams.
• Fabricator friendly: Bond to particleboard or MDF with contact adhesive for countertops, cabinet sides and wall panels.

Specifications Table:

Coverage & How Much You Need:

One sheet covers up to 60 sq. ft. in the largest 60 in. x 144 in. size; a 48 in. x 96 in. sheet covers 32 sq. ft. Choose the sheet size that lets each countertop or panel come from a single piece to avoid visible seams.

Fit and Compatibility:

Designed for bonding to particleboard or MDF substrates with contact adhesive; postforming grade works with a postforming line for rolled edges. Matching Wilsonart edge treatments and backer sheets are ordered separately.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One laminate sheet in the finish, grade and size you select; substrate, adhesive and edge banding are sold separately.

Q: Which grade should I choose?
A: Use 107 Standard for horizontal surfaces like countertops, 335 Vertical for cabinet ends and walls, and 350 Postform when you need a rolled front edge.

Q: What sizes are available?
A: Seven sizes from 36 in. x 96 in. up to 60 in. x 144 in., depending on finish and grade combination.

Q: How do I install it?
A: Cut to size, apply contact adhesive to both the laminate and the substrate, then roll or press firmly; a balanced backer sheet on the underside helps prevent substrate warping.

Q: Is this a stocked item?
A: It is a special order option; if not in stock locally, allow approximately a 2-week lead time, with a 24-hour window to cancel.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For countertop work, pair the 350 Postform grade with a 3/8 in. or larger inside radius on your postforming line; the 107 Standard grade is best reserved for flat layup. Always balance the substrate with a backer sheet to keep panels flat, and let large sheets acclimate in the shop before cutting. The 48 in. x 96 in. size handles most run layouts with one seam, while the 60 in. wide sheets suit deeper islands.

Support full sheets on a large flat table when handling and cutting, and use eye, hearing and dust protection when routing or sawing laminate.

Order your Wilsonart Fusion Maple 7909K laminate sheet in the finish, grade and size your job needs.