Wilsonart D92 Dove Grey High-Pressure Laminate Sheet, Fire-Rated, Compact, Chemsurf and Solicor Grades, Multiple Sizes

Wilsonart D92 Dove Grey is a solid light grey high-pressure laminate design available in 14 grades including standard, vertical, postforming, high-wear, Solicor, Chemsurf chemical-resistant, 1/2 in. compact, fire-rated and RE-COVER options. Sheets run from 30 in. x 96 in. to 60 in. x 144 in. Each order unit is one sheet in the selected finish, grade and size.

Key Features:

• Light grey solid: D92 Dove Grey is a solid light grey color laminate design for bright, neutral interiors.
• Fourteen grades: Grades include 107 Standard HPL, 161 Solicor HPL, 335 Vertical HPL, 350 Postform HPL, 390 Chemsurf HPL, 568 Compact HPL, fire-rated 604, 605, 607 and 675, and 735 RE-COVER, plus high-wear versions.
• High-wear options: 107 Standard High Wear, 335 Vertical High Wear and 350 Postform High Wear variants are listed for heavier-duty wear applications.
• Chemical-resistant grade: 390 Chemsurf HPL is offered in six sizes from 48 in. x 96 in. to 60 in. x 144 in. for laboratory-type surfaces.
• Half-inch compact: 568 Compact HPL panels are 1/2 in. thick in five sizes for self-supporting panels and worktops.
• Three finishes: Offered in 38 Fine Velvet Finish, 60 Matte Finish and 60 Matte Finish + Film.
• Fire-rated variants: 604, 605, 607 and 675 fire-rated grades are listed for code-required interiors.

Specifications Table:

Coverage & How Much You Need:

One sheet covers its nominal area, for example 48 in. x 96 in. equals 32 sq. ft. and 60 in. x 144 in. equals 60 sq. ft. before trimming. Lay out your parts first to choose the smallest sheet that fits with minimal waste.

Fit and Compatibility:

All variants are the same D92 Dove Grey design and can be mixed across grades in one project. Substrate, contact adhesive, edgebanding and balancing backers are sold separately.

Frequently Asked Questions (FAQ):

Q: What does one unit include?
A: One laminate sheet or 1/2 in. compact panel in the finish, grade and size selected.

Q: What is Solicor grade used for?
A: The 161 Solicor HPL is a color-through grade listed here in 48 in. x 96 in. matte, used where edge color matching matters.

Q: Which grade for a lab countertop?
A: The 390 Chemsurf HPL grade is the chemical-resistant option for surfaces exposed to chemicals.

Q: Can I use compact panels without a substrate?
A: Yes, the 568 Compact HPL at 1/2 in. thick is intended for self-supporting applications such as partitions and worktops.

Q: Is there a lead time?
A: It is listed as a non-standard special order; allow approximately 2 weeks for delivery if not stocked locally, with a 24-hour cancellation window.

Q: Which grade for cabinet interiors and sides?
A: Use 335 Vertical HPL for vertical surfaces such as cabinet ends and wall panels.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For standard countertops, bond 107 Standard HPL to 3/4 in. particleboard or MDF with contact cement and add a backer sheet on the underside to balance the panel. If the job sees heavy traffic, the High Wear postform and standard variants are listed in this design. Chemsurf edges and seams need careful bonding in wet or chemical service, and compact panels require carbide tooling and support during cutting to avoid chipping.

Wear cut-resistant gloves, eye protection and a dust mask when cutting or routing laminate; edges are sharp and dust is fine.

Order Wilsonart D92 Dove Grey laminate in the grade and size your project needs.