Wilsonart D417 Lapis Blue Solid Bright Blue High-Pressure Laminate Sheet, Multiple Grades and Sizes

Wilsonart D417 Lapis Blue is a solid bright blue color laminate offered in matte, matte + film and Fine Velvet finishes across 11 grades, from standard and postforming to compact, chemical-resistant, fire-rated and RE-COVER vertical HPL. This page sells 43 variants in sheet sizes from 30 in. x 96 in. up to 60 in. x 144 in., plus 1/2 in. compact panels. Pick the finish, grade and size for your countertop, cabinet, lab or code-required application.

Key Features:

• Vivid solid blue: D417 Lapis Blue is a solid bright blue color design.
• Three finishes: Available in 38 Fine Velvet Finish, 60 Matte Finish and 60 Matte Finish + Film.
• Eleven grades: Offered in standard, high wear, postforming, vertical, Chemsurf, compact, fire-rated and RE-COVER vertical HPL grades.
• Self-supporting panels: 568 Compact HPL variants are 1/2 in. thick and need no substrate.
• Chemical-resistant option: 390 Chemsurf HPL is the grade intended for laboratory and chemical-exposure surfaces.
• Fire-rated options: 604, 605 and 607 fire-rated grades serve code-required interiors.
• Broad size range: Sheet sizes span 30 in. x 96 in. to 60 in. x 144 in., including 36 in. x 96 in. and 48 in. x 120 in.

Specifications Table:

Coverage & How Much You Need:

A 48 in. x 96 in. sheet covers 32 square feet and a 60 in. x 144 in. sheet covers 60 square feet before waste. For countertops, allow 1 to 2 inches per end for trimming; postforming grade covers the deck plus the rolled front edge.

Fit and Compatibility:

Standard, postforming and high wear grades bond to particleboard or MDF with contact adhesive; compact 1/2 in. panels are self-supporting and need no substrate. Edge banding, adhesive, backer sheets and fabricating tools are sold separately.

Frequently Asked Questions (FAQ):

Q: What grades are available and what are they for?
A: 107 Standard for general horizontal use, 107 High Wear and 350 Postform High Wear for heavier traffic, 350 Postform for rolled edges, 335 Vertical for cabinet sides and walls, 390 Chemsurf for labs, 568 Compact 1/2 in. self-supporting panels, 604/605/607 for fire-rated interiors, and 735 RE-COVER for refacing.

Q: What comes with one order?
A: One sheet or compact panel in the selected finish, grade and size; adhesive, substrate and trim are sold separately.

Q: How do I choose a sheet size?
A: Match the longest countertop run to a 60 in. x 144 in. or 48 in. x 144 in. sheet to avoid seams, and use smaller 30 in. x 96 in. sheets for vanities and casework.

Q: Is the compact panel really 1/2 inch thick?
A: Yes, the 568 Compact HPL variants are printed at 1/2 in. thickness in four panel sizes.

Q: Is this stocked?
A: It is a special-order non-standard option; if not in stock locally, allow approximately a 2-week lead time, with a 24-hour cancellation window.

Q: Which finish hides fingerprints best?
A: The Fine Velvet and Matte finishes are the low-glare choices; the source does not make fingerprint-resistance claims, so check manufacturer data for that property.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For a bright blue countertop, spec 350 Postform grade if you want a rolled nosing, or 107 High Wear for a square-edge flat-lay build. Always balance horizontal applications with a backer sheet on particleboard to prevent warp, and let sheets acclimate in the shop before gluing. Compact 1/2 in. panels route and polish nicely for waterfall edges and open shelving where substrate would add weight. For school or lab work, choose 390 Chemsurf; for code-driven commercial jobs, pick the matching fire-rated grade and verify the required listing with your inspector.

Wear gloves, eye protection and a dust mask when cutting or routing laminate, and ensure adequate ventilation when applying contact adhesive.

Order Wilsonart D417 Lapis Blue laminate in the finish, grade and sheet size your build calls for.