Skip to content
Wilsonart D327-60 Pepperdust Solid Medium Taupe High-Pressure Laminate Sheet, Matte Finish
Regular price $67.78Orders start at $399 — combine any items to reach the minimum. Learn more
Wilsonart D327-60 Pepperdust Solid Medium Taupe High-Pressure Laminate Sheet, Matte Finish
Wilsonart Pepperdust is a solid medium taupe high-pressure laminate sheet for countertops, cabinetry and wall surfacing. This page sells the D327-60 matte finish variant as a single HPL sheet. Pair it with matching Wilsonart edge banding or a coordinating solid for a clean monochrome top.
Key Features:
- Solid taupe color: Pepperdust is a solid medium taupe color laminate design with no pattern to match at seams.
- Matte finish: The -60 variant carries Wilsonart's Matte Finish (60) surface.
- Standard HPL: Offered as a standard high-pressure laminate sheet in the Favorite Laminate Options program.
- Fabricator friendly: HPL sheets bond readily to particleboard or MDF substrates with contact adhesive.
- Neutral palette: Medium taupe tone works for both residential and commercial interiors.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Wilsonart |
| Manufacturer model | D327-60 |
| Sell unit | 1 sheet |
| Design number | D327-60 |
| Design name | Pepperdust |
| Surface / pattern | Solid medium taupe color |
| Available finishes | Matte Finish (60), listed under Favorite Laminate Options |
| Available grades | Standard HPL (as listed for this program item) |
| Category | High-pressure laminate, standard HPL sheets |
Coverage & How Much You Need:
One sheet covers the full sheet face area; allow trim allowance for layout. Size the job by laying out parts to minimize waste before ordering.
Fit and Compatibility:
Pairs with Wilsonart edge banding and underlayment/backer laminate sheets in the same design. Bond to particleboard or MDF with contact adhesive; a balanced backer sheet is recommended to limit warping.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One Wilsonart Pepperdust (D327-60) high-pressure laminate sheet; substrate and adhesive are sold separately.
Q: What finish is this?
A: This item is the Matte Finish (60) variant of the Pepperdust design.
Q: How do I install it?
A: Bond to a flat particleboard or MDF core with contact adhesive, trim the overhang with a router, and file the edge smooth.
Q: Is the color solid through the sheet?
A: Pepperdust is a solid color design, so cut edges and seams show consistent color.
Q: Do I need a backer sheet?
A: A balancing backer laminate on the underside is recommended practice to prevent the panel from warping.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Solid colors like Pepperdust are the easiest tops to lay out because seams and edge banding disappear. Use a flat, well-sealed 45 lb particleboard core and roll the sheet down fully to avoid voids. Choose a matching matte Wilsonart backer on the underside to keep the panel balanced.
Wear eye protection and a dust mask when routing or cutting laminate; edges and chips are sharp.
Order the Wilsonart Pepperdust matte laminate sheet today for a clean, neutral countertop surface.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
