Wilsonart 8215HW Antique Bourbon Pine High-Pressure Laminate Sheet 60 in. x 96 in. Distressed Pine Woodgrain

Wilsonart Antique Bourbon Pine is a distressed pine woodgrain high-pressure laminate in red, orange and black tones with varied plank widths for a reclaimed wood look. This page sells the 8215HW design in two variants: 60 Matte Finish vertical-grade and 12 Softgrain Finish postforming grade, both 60 in. x 96 in. Order one sheet per variant; special order lead time applies.

Key Features:

• Reclaimed pine look: A wood design in distressed red, orange and black tones with varied plank widths that creates a distressed, reclaimed wood feel.
• Large design repeat: Approximate design repeat is 53 in. long by 62 in. wide, so seams should be planned around the pattern.
• Vertical grade option: The 335 High Wear Vertical HPL variant is intended for cabinet sides, wall panels and other vertical surfaces.
• Postforming option: The 350 High Wear Postform HPL variant can be formed over a radius for rolled countertop edges.
• Two finishes: Offered in 12 Softgrain Finish and 60 Matte Finish across the listed variants.
• Full sheet size: Both listed variants come in 60 in. x 96 in. sheets.

Specifications Table:

Coverage & How Much You Need:

One 60 in. x 96 in. sheet covers 40 square feet of finished surface before accounting for trim waste and pattern matching. With a 62 in. wide design repeat, plan layout so pattern alignment at seams is deliberate.

Fit and Compatibility:

Bonds to approved substrates such as particleboard or MDF with contact adhesive; a laminate backer sheet on the opposite face is recommended to balance the panel. Postforming grade requires postforming equipment for rolled edges; adhesives, edge banding and substrates are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included with my order?
A: One high-pressure laminate sheet in the finish, grade and 60 in. x 96 in. size you select. Substrate, adhesive and backer sheets are sold separately.

Q: Which grade should I choose?
A: Choose 335 High Wear Vertical HPL for cabinet sides and wall surfaces, and 350 High Wear Postform HPL when you need to form a rolled front edge on a countertop.

Q: What sheet size is available?
A: Both listed variants are 60 in. x 96 in.

Q: Is this in stock?
A: This is a special-order, non-standard option; if not in stock locally, allow approximately a 2-week lead time for delivery, with a 24-hour cancellation window and an 8-sheet minimum as stated by the supplier.

Q: How do I handle the pattern repeat?
A: The approximate repeat is 53 in. by 62 in.; lay out panels so plank pattern lines up at seams before cutting.

Q: What substrate should I use?
A: A smooth, flat particleboard or MDF core is standard for laminate work; bond with contact adhesive and use a backer laminate on the underside to prevent warping.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

This distressed plank design reads best on long, unbroken runs, so pick the 60 in. width for island or bar tops and wall panels where you can keep seams in line with the repeat. Use the 350 postforming grade with a 12 Softgrain Finish for rolled nose edges, and the 335 vertical grade for tall cabinet ends and wainscot-style walls. Always bond a balancing backer to the opposite face of the substrate and let large sheets acclimate in the shop before fabrication.

HPL sheets are heavy and have sharp cut edges, so carry large sheets with two people and wear gloves and eye protection when routing or trimming.

Order Wilsonart Antique Bourbon Pine HPL today for a reclaimed pine surface with modern laminate durability.