Skip to content
Wilsonart 7972 Truss Maple High-Pressure Laminate, Chemsurf and Postform Grades, 48 in. x 96 in. and 60 in. x 144 in., Matte Natural Maple
Regular price $216.13Orders start at $399 — combine any items to reach the minimum. Learn more
Wilsonart 7972 Truss Maple High-Pressure Laminate, Chemsurf and Postform Grades, 48 in. x 96 in. and 60 in. x 144 in., Matte Natural Maple
Wilsonart Truss Maple is a natural maple laminate design in blocked wood format, part of the Wilsonart Non-Standard Design Line. Each order is one sheet in 60 Matte Finish, available as 390 Chemsurf chemical-resistant HPL in 48 in. x 96 in. or 350 Postform HPL in 48 in. x 96 in. or 60 in. x 144 in. Choose Chemsurf for lab tops or Postform for rolled-edge countertops.
Key Features:
- Natural maple: Natural maple laminate design in blocked wood format from the Wilsonart Non-Standard Design Line.
- Chemical-resistant grade: 390 Chemsurf HPL is formulated for laboratory and chemically demanding work surfaces.
- Postforming grade: 350 Postform HPL items allow rolled front edges on countertops.
- Matte finish: All three variants are in 60 Matte Finish for a low-sheen, practical surface.
- Two useful sizes: Available as 48 in. x 96 in. or 60 in. x 144 in. sheets to fit worktop layouts.
- Predictable repeat: Approximate design repeat of 31 in. length by 51 in. width for seam planning.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Wilsonart |
| Manufacturer model | 7972 |
| Sell unit | 1 sheet |
| Material | High-pressure laminate (HPL) |
| Design name | Truss Maple |
| Available finishes | 60 Matte Finish |
| Available grades | 390 Chemsurf HPL, 350 Postform HPL |
| Available sheet sizes | 48" x 96", 60" x 144" |
| Surface / pattern | Blocked natural maple wood format |
| Design repeat | Approx. 31 in. length x 51 in. width |
| Recommended use | Postforming (350) and chemical-resistant surfaces (390) as printed by grade |
| Number of variants | 3 listed items |
| Recommended substrate | Bond to particleboard or MDF with contact adhesive |
Coverage & How Much You Need:
A 48 in. x 96 in. sheet covers 32 sq ft and a 60 in. x 144 in. sheet covers 60 sq ft. Lay out countertop or lab bench runs to use full sheet lengths and align the approximately 31 in. x 51 in. design repeat at seams.
Fit and Compatibility:
Both grades bond to particleboard or MDF with contact adhesive over a balanced backer sheet. Use the 390 Chemsurf grade with compatible chemical-resistant edges for laboratory work, and the 350 Postform grade on postforming lines for rolled edges. Adhesives, substrate, backer and edge materials are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One sheet of Truss Maple in 60 Matte Finish in the grade and size you select from the three listed variants.
Q: Which grade for a laboratory countertop?
A: Choose the 390 Chemsurf HPL, which is designed for chemical-resistant surfaces, in 48 in. x 96 in.
Q: Can I postform this design?
A: Yes, the 350 Postform HPL variants in 48 in. x 96 in. and 60 in. x 144 in. are made for rolled edges.
Q: Is this a stock design?
A: No, Truss Maple is part of the Non-Standard Design Line and is a special order; allow about 2 weeks lead time if not stocked locally, with a 24-hour cancellation window.
Q: How do I balance the panel?
A: Apply a backer sheet to the underside of the particleboard or MDF substrate to equalize stress and prevent warping.
Q: What is a blocked wood format?
A: It describes the design's larger block-like wood figure rather than a continuous linear grain; the approximate repeat is 31 in. by 51 in.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Truss Maple is a practical choice for school and laboratory benchtops: use Chemsurf grade with a chemical-resistant edge for wet or reagent-exposed work, and reserve Postform grade for general counters with rolled fronts. Keep seams away from sink and cooktop cutouts, and roll the sheet thoroughly after contact-adhesive bonding. On wide runs the 60 in. x 144 in. sheet reduces seams to one per run.
Chemical-resistant laminate still requires good ventilation during adhesive bonding; wear gloves and eye protection when cutting and routing sharp-edged sheets.
Order Wilsonart Truss Maple in Chemsurf or postforming grade for your bench and countertop work.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
