Skip to content
Wilsonart 7850-60 Beigewood Rotary Cut Oak High-Pressure Laminate Sheet, Matte Finish
Regular price $67.78Orders start at $399 — combine any items to reach the minimum. Learn more
Wilsonart 7850-60 Beigewood Rotary Cut Oak High-Pressure Laminate Sheet, Matte Finish
This is Wilsonart Beigewood (design 7850-60), a rotary cut oak high-pressure laminate with an overall beige color, lavender and yellow undertones and light tan graining, finished in 60 Matte. One order unit is a single HPL sheet in the grade and size you select. Pair it with matching Wilsonart edge banding or a coordinating solid for a complete casework or countertop surfacing job.
Key Features:
- Rotary cut oak: A rotary cut oak laminate design with an overall beige color and light tan graining.
- Warm undertones: The design carries lavender and yellow undertones that shift subtly under different lighting.
- Matte surface: Offered in the 60 Matte Finish for a low-sheen, low-glare worktop look.
- Full HPL construction: A high-pressure laminate sheet built to be bonded to a suitable substrate.
- Fabricator friendly: Cuts and glues with standard countertop laminate tooling and contact adhesive.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Wilsonart |
| Manufacturer model | 7850-60 |
| Sell unit | 1 sheet |
| Design number | 7850-60 |
| Design name | Beigewood |
| Surface / pattern | Rotary cut oak; overall beige with lavender and yellow undertones and light tan graining |
| Available finishes | 60 Matte Finish |
| Recommended use | Standard HPL sheet for horizontal and general surfacing use |
Coverage & How Much You Need:
One sheet covers the face area of the listed sheet size; plan layouts so the grain runs along the longest dimension and allow trim allowance at every edge.
Fit and Compatibility:
Bond to particleboard, MDF or plywood with contact adhesive in a conventional laminate top or panel build-up. Substrate, adhesive and edge treatment are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included with this order?
A: One Wilsonart Beigewood HPL laminate sheet in the selected grade and size; substrate and adhesive are not included.
Q: What does this sheet look like?
A: It is a rotary cut oak design, overall beige with lavender and yellow undertones and light tan graining, in a 60 Matte Finish.
Q: How do I install it?
A: Cut to size, apply contact adhesive to both the sheet and substrate, align carefully and roll or press firmly; trim edges after the adhesive sets.
Q: What substrate should I use?
A: A flat, smooth 45 lb particleboard or MDF core is typical for countertops and cabinet panels.
Q: How much do I need?
A: Measure each face to be covered and choose a sheet size that yields your largest panels with trim margin; seams may be needed on long runs.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Beigewood's rotary cut grain is broad and fairly even, so seams are less noticeable than on strongly figured designs; still, plan the run so the main countertop comes from one sheet. Always bond HPL to a stable core and balance it with a backer sheet on the underside to prevent warp. Acclimatize the sheet in the shop for a couple of days before gluing.
Wear eye protection and a dust mask when cutting laminate, and handle sheet edges carefully to avoid cuts.
Order the Wilsonart Beigewood HPL laminate sheet today and get a warm, woodgrain surface for your next countertop or casework job.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
