Wilsonart 6284 Satin Brushed Copper Aluminum Metallic Laminate Sheet 48 in. x 96 in.

Wilsonart 6284 Satin Brushed Copper Aluminum is a metallic decorative laminate with a short-line brushed aluminum face in a satin sheen and a warm copper color. The sheet measures 48 in. x 96 in. and is supplied in Deco Metal Finish on 419 Anodized Aluminum Deco Metal grade. Each order is one sheet, with tonal variation listed as consistent.

Key Features:

• Copper metallic look: The face is aluminum in a short-line brush, satin sheen, in copper color.
• Warm accent tone: Copper tone brings warmth to feature walls, bars and hospitality interiors.
• Consistent tonal match: The manufacturer lists tonal and color variation as consistent.
• Large 4x8 sheet: The 48 in. x 96 in. size covers a full wall panel with fewer joints.
• Anodized aluminum grade: Offered on 419 Anodized Aluminum Deco Metal grade with a Deco Metal Finish.

Specifications Table:

Coverage & How Much You Need:

One sheet is 48 in. x 96 in., equal to 32 sq. ft. of decorative surface. Estimate sheet count by dividing your panel area by 32 sq. ft. and adding an allowance for cuts and layout waste.

Fit and Compatibility:

Bond to a flat MDF or particleboard substrate with contact adhesive and use a balancing backer on the opposite side. Pairs with other Wilsonart designs for trim and adjacent surfaces; backers are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One 48 in. x 96 in. sheet of Wilsonart 6284 Satin Brushed Copper Aluminum in Deco Metal Finish on 419 Anodized Aluminum Deco Metal grade.

Q: How many sheets do I need?
A: Each sheet covers 32 sq. ft.; divide your total surface area by 32 and add a waste allowance for cuts.

Q: How is it installed?
A: Apply contact adhesive to both the substrate and the laminate back, allow proper flash time, then press the sheet firmly and roll out the surface.

Q: Is the copper tone uniform?
A: Tonal and color variation are listed as consistent for this design, though checking adjacent panels on site is recommended.

Q: Can it be bent around edges?
A: This metallic laminate is meant for flat decorative surfaces; use a standard postforming-grade design for rolled edges.

Q: How do I avoid damaging the face when cutting?
A: Cut face up with a fine-tooth, non-ferrous blade and protect the aluminum surface with a clean padded work table.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Copper-tone metallic laminate reads best on flat vertical panels and door inserts; keep panel widths modest and seams aligned with the brushed direction. Use a balanced panel with a backer sheet to fight warp, especially in kitchen or bar environments with humidity swings. Scribe and file edges carefully since the aluminum layer will not hide a rough cut line.

Wear gloves and safety glasses when cutting laminate; cut edges and sheet corners are sharp, and use adhesives in a ventilated space.

Bring warm metallic style to your project with Wilsonart 6284 Satin Brushed Copper Aluminum laminate.