Skip to content
Wilsonart 6281P Satin Brushed Smoke Aluminum Phenolic-Back Metallic Laminate 48 in. x 96 in.
Regular price $328.19Orders start at $399 — combine any items to reach the minimum. Learn more
Wilsonart 6281P Satin Brushed Smoke Aluminum Phenolic-Back Metallic Laminate 48 in. x 96 in.
Wilsonart 6281P Satin Brushed Smoke Aluminum pairs a short-line brushed, satin-sheen aluminum face in a medium blue-grey tone with a phenolic backing for added dimensional stability. The sheet measures 48 in. x 96 in. and is supplied in Deco Metal Finish on 418 Phenolic-Back Deco Metal grade. One order is one sheet.
Key Features:
- Phenolic backing: Supplied on 418 Phenolic-Back Deco Metal grade, with a phenolic backing layer under the aluminum face.
- Brushed satin surface: The aluminum face has a short-line brush pattern with a satin sheen.
- Medium blue-grey color: The design is a medium blue-grey tone named Satin Brushed Smoke Aluminum.
- Consistent color: Tonal and color variation are listed as consistent by the manufacturer.
- Full 4x8 sheet: The 48 in. x 96 in. sheet reduces seams on large panel installations.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Wilsonart |
| Manufacturer model | 6281P |
| Sell unit | 1 sheet |
| Design number | 6281P |
| Design name | Satin Brushed Smoke Aluminum |
| Available finishes | Deco Metal Finish |
| Available grades | 418 Phenolic-Back Deco Metal |
| Available sheet sizes | 48 in. x 96 in. |
| Material | Metallic decorative laminate with aluminum face and phenolic backing |
| Color / finish | Medium blue-grey, short-line brush, satin sheen |
| Nominal size | 48 in. x 96 in. |
| Surface / pattern | Short-line brushed aluminum, satin sheen |
| Tonal variation | Consistent |
| Recommended use | Decorative vertical and accent surfaces |
Coverage & How Much You Need:
One 48 in. x 96 in. sheet provides 32 sq. ft. of finished surface. Plan cut sizes to maximize yield and allow for kerf and edge trim when laying out the job.
Fit and Compatibility:
The phenolic backing is intended for bonding to flat substrates such as MDF or particleboard with contact adhesive. A balancing backer on the opposite face of the substrate helps control warp and is sold separately.
Frequently Asked Questions (FAQ):
Q: What arrives with my order?
A: One 48 in. x 96 in. sheet of Wilsonart 6281P Satin Brushed Smoke Aluminum in Deco Metal Finish on 418 Phenolic-Back Deco Metal grade.
Q: How is the P version different from the standard 6281?
A: The P design carries a phenolic backing on the 418 grade, whereas the standard design is offered on 419 Anodized Aluminum Deco Metal grade.
Q: How much does one sheet cover?
A: The 48 in. x 96 in. sheet covers 32 sq. ft., enough for a tall wall panel or several smaller accents.
Q: What substrate should I bond it to?
A: A flat, stable MDF or particleboard core bonded with contact adhesive is the standard approach for metallic laminate panels.
Q: Is the color consistent between panels?
A: The manufacturer lists tonal and color variation as consistent for this design.
Q: Does it need a backer sheet?
A: Yes, bonding a balancing backer to the reverse side of the substrate helps keep the panel flat after lamination.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The phenolic backing adds stiffness and a more uniform gluing surface than bare foil, which makes 6281P easier to handle on a panel saw and less prone to telegraphing substrate flaws. Keep contact adhesive coats even on both faces and let them flash off fully before pressing. Cut from the aluminum side with a fine-finish blade and keep the brush direction oriented consistently across a wall run.
Wear cut-resistant gloves and eye protection when trimming laminate sheets; edges are sharp and contact adhesive fumes require good ventilation.
Add Wilsonart 6281P Satin Brushed Smoke Aluminum phenolic-back laminate to your panel package today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
