Wilsonart 6281 Satin Brushed Smoke Aluminum Metallic Laminate Sheet 48 in. x 96 in.

Wilsonart 6281 Satin Brushed Smoke Aluminum is a metallic decorative laminate with a short-line brushed aluminum face in a satin sheen and a medium blue-grey tone. The sheet measures 48 in. x 96 in. and is supplied in Deco Metal Finish on 419 Anodized Aluminum Deco Metal grade. Tonal variation is consistent across the sheet, and each order is one sheet.

Key Features:

• Metallic aluminum face: The design features aluminum in a short-line brush with a satin sheen.
• Medium blue-grey tone: Color is a medium blue-grey, described as Satin Brushed Smoke Aluminum.
• Consistent tonal match: The manufacturer lists tonal and color variation as consistent across the design.
• Full-size sheet: The sheet is 48 in. x 96 in., covering large wall, accent or casework panels with fewer seams.
• Anodized aluminum grade: Supplied on 419 Anodized Aluminum Deco Metal grade with a Deco Metal Finish.
• Design versatility: The brushed metallic look suits accent walls, reception areas, retail fixtures and furniture accents.

Specifications Table:

Coverage & How Much You Need:

One sheet measures 48 in. x 96 in., which is 32 sq. ft. of decorative surface. Measure each panel area and plan cut layouts to minimize seams; order extra for waste on large installations.

Fit and Compatibility:

Bond to a flat, stable substrate such as MDF or particleboard using contact adhesive, following the laminate manufacturer's bonding recommendations. Pair with matching Wilsonart designs for countertop or casework; backer sheets are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One 48 in. x 96 in. sheet of Wilsonart 6281 Satin Brushed Smoke Aluminum in Deco Metal Finish on 419 Anodized Aluminum Deco Metal grade.

Q: How much area does one sheet cover?
A: A 48 in. x 96 in. sheet provides 32 sq. ft. of surface, enough for a full-height wall panel or multiple accent pieces depending on layout.

Q: What adhesive should I use?
A: Contact adhesive is the standard method for bonding metallic laminate to a plywood, MDF or particleboard substrate; follow the adhesive manufacturer's coverage and open-time directions.

Q: Is the color identical sheet to sheet?
A: The manufacturer lists tonal and color variation as consistent for this design, but visually inspecting adjacent panels on site before fabrication is good practice.

Q: Can this laminate be postformed?
A: Metallic Deco Metal laminate is intended for flat decorative work; use a standard-grade Wilsonart design for postformed rolled edges.

Q: How should I handle a 4 ft. x 8 ft. metallic sheet?
A: Carry the sheet on edge with two people and lay it flat on a clean, padded surface to avoid flexing or denting the aluminum face.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For a shop, 6281 works best as a flat-panel accent material: glue it to a stable, sanded MDF or particleboard core with contact cement and roll it out thoroughly to avoid voids, especially over the metallic face. Always bond a balancing backer to the opposite side of the substrate to prevent warp. Keep the brushed direction consistent across panels and cut from the face side with a fine-tooth blade to avoid chipping the aluminum layer.

Wear gloves and eye protection when cutting laminate; sheet edges and cut edges are sharp, and adhesives require ventilation.

Order Wilsonart 6281 Satin Brushed Smoke Aluminum metallic laminate for your next accent wall or casework project.