Skip to content
Wilsonart 6202 Satin Brushed Nickel Metallic Laminate Sheet 48 in. x 96 in.
Regular price $276.99Orders start at $399 — combine any items to reach the minimum. Learn more
Wilsonart 6202 Satin Brushed Nickel Metallic Laminate Sheet 48 in. x 96 in.
Wilsonart 6202 Satin Brushed Nickel is a metallic decorative laminate with aluminum in a short-line brush, satin sheen, silver in color with a light warm grey undertone, supplied as a 48 in. x 96 in. sheet. One order unit is 1 sheet in the 419 Anodized Aluminum Deco Metal grade.
Key Features:
- Real metal surface: The design features aluminum in a short-line brush with a satin sheen.
- Brushed nickel tone: Silver color with a light warm grey undertone reads as brushed nickel.
- Anodized aluminum: Offered in the 419 Anodized Aluminum Deco Metal grade.
- Consistent coloration: Tonal and color variation is rated consistent across the sheet.
- Full sheet format: The 48 in. x 96 in. sheet suits full countertop runs and tall panels.
- Deco Metal finish: Part of the Wilsonart Deco Metal metallic laminate line.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Wilsonart |
| Manufacturer model | 6202 |
| Sell unit | 1 sheet |
| Design number | 6202 |
| Design name | Satin Brushed Nickel |
| Material | Aluminum metallic decorative laminate |
| Color / finish | Silver with light warm grey undertone, short-line brush, satin sheen |
| Surface / pattern | Short-line brushed metal |
| Available finishes | Deco Metal Finish |
| Available grades | 419 Anodized Aluminum Deco Metal |
| Available sheet sizes | 48 in. x 96 in. |
| Tonal variation | Consistent |
| Category | Specialty decorative laminate, metallic laminates |
Coverage & How Much You Need:
One 48 in. x 96 in. sheet covers 32 sq. ft. of surface. Lay out cuts so the brushed direction is continuous across seams and adjacent panels.
Fit and Compatibility:
Bonds to approved substrates such as particleboard or MDF with contact adhesive and pairs with the Wilsonart Deco Metal metallic palette. Backer sheets, adhesive and edge treatments are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included with my order?
A: One 48 in. x 96 in. sheet in the 419 Anodized Aluminum Deco Metal grade; adhesive and substrate are sold separately.
Q: How much area does one sheet cover?
A: A 48 in. x 96 in. sheet covers 32 sq. ft. before cuts and scrap.
Q: How is it installed?
A: Cut to size and bond to a flat, sound substrate with contact adhesive following standard laminate fabrication practice.
Q: What color is it?
A: It is silver with a light warm grey undertone in a short-line brush satin sheen.
Q: Will sheets match each other?
A: The manufacturer rates tonal and color variation as consistent for this design.
Q: Can it be used on cabinet sides?
A: Yes, it can be bonded to flat vertical surfaces such as cabinet ends and feature walls over a suitable substrate.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Satin Brushed Nickel is the most neutral of the Deco Metal tones and coordinates easily with stainless appliances and standard hardware finishes. Cut from the backer side and keep the protective film on until installation to preserve the satin face. Balance every panel with a backer sheet on the underside to keep wide runs flat over time.
Cut laminate edges and corners are sharp; wear cut-resistant gloves and eye protection when cutting and handling large sheets.
Order Wilsonart 6202 Satin Brushed Nickel metallic laminate for a classic brushed-nickel surface on counters and walls.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
