Wilsonart 6100 Matte Pewter Metallic Laminate Sheet 48 in. x 96 in., Deco Metal Finish

Wilsonart 6100 Matte Pewter is a metallic decorative laminate in a light warm grey with moderate tonal and color variation in a linear formation within the sheet and from sheet to sheet. It comes in a Deco Metal Finish on a 415 Metro Collection Deco Metal grade in a 48 in. x 96 in. sheet, and one order is one sheet. Pair it with a suitable substrate and contact adhesive for vertical accents and feature surfaces.

Key Features:

• Metallic surface: Deco Metal Finish delivers a metallic look in a matte pewter grey.
• Large sheet size: The 48 in. x 96 in. sheet covers sizeable wall panels or feature areas with fewer seams.
• Linear variation: Tonal and color variation runs in a linear formation within the sheet.
• Moderate variation: The design has a stated moderate tonal/color variation from sheet to sheet.
• Warm grey tone: A light warm grey that coordinates with a wide range of palettes.

Specifications Table:

Coverage & How Much You Need:

One 48 in. x 96 in. sheet covers 32 sq. ft. of surface before allowance for trimming and seams. Measure each panel area and add cutting allowance when sizing a job.

Fit and Compatibility:

This sheet is bonded to a suitable substrate such as particleboard or MDF with contact adhesive; substrate and adhesive are sold separately. For curved or rolled edges, use a postforming-grade laminate instead of this Deco Metal grade. Backer laminate is recommended on the reverse of thin substrates to reduce warping.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One 48 in. x 96 in. Wilsonart 6100 Matte Pewter metallic laminate sheet in Deco Metal Finish on the 415 Metro Collection Deco Metal grade.

Q: How much surface does one sheet cover?
A: A 48 in. x 96 in. sheet covers 32 sq. ft.; allow extra for trim cuts and seams.

Q: How is it installed?
A: Bond it to a smooth, flat substrate such as particleboard or MDF using contact adhesive, following the adhesive manufacturer's instructions.

Q: Can it be used on countertops with rolled edges?
A: This Deco Metal grade is not the postforming grade; for rolled edges choose a postforming-grade laminate.

Q: Will every sheet look identical?
A: No; the design has moderate tonal and color variation within the sheet and from sheet to sheet.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Metallic laminates like this Deco Metal design are best on vertical or light-duty feature surfaces rather than heavy work surfaces. Use a balanced backer on the opposite face of the substrate to minimize warp, and inspect seams under strong raking light because metallic finishes show seam lines and adhesive telegraphing more than solid colors. Plan sheet layout so the linear variation runs consistently across adjacent panels.

Wear gloves and eye protection when cutting laminate; cut edges and the backing can be sharp and abrasive dust is generated.

Order Wilsonart 6100 Matte Pewter metallic laminate in the 48 in. x 96 in. sheet for your next feature surface.