Wilsonart 4947 Raw Cotton Compact and Postform Laminate Sheets, Multiple Sizes and Finishes

Wilsonart 4947 Raw Cotton is a low-contrast abstract high-pressure laminate in taupe with grey and brown features, offered here across every listed grade and sheet size. Choose from Matte or Fine Velvet finishes in standard, vertical, postforming, Chemsurf and compact HPL, sold as one sheet or panel per unit. Pair it with matching backer laminate and contact adhesive for countertops, cabinet interiors and self-supporting panels.

Key Features:

• Abstract neutral design: Low-contrast abstract pattern in taupe with grey and brown features suits a wide range of cabinet and countertop schemes.
• Five grade options: Available in Standard HPL, Vertical HPL, Postform HPL, Chemsurf HPL and Compact HPL (514 and 568) to match the application.
• Two finish choices: Offered in 60 Matte Finish and 38 Fine Velvet Finish depending on the item.
• Broad size range: Sheet sizes run from 30 in. x 96 in. up to 1/2 in. x 60 in. x 144 in. compact panels.
• Chemical-resistant option: The 390 Chemsurf HPL grade is intended for laboratory and other chemically demanding surfaces.
• Self-supporting compact: 1/2 in. compact HPL items can be used for self-supporting panels without a substrate.
• Special order item: Non-standard option; if not in stock locally, allow approximately a 2-week lead time.

Specifications Table:

Coverage & How Much You Need:

One 60 in. x 144 in. sheet covers 60 square feet; a 48 in. x 96 in. sheet covers 32 square feet; a 30 in. x 96 in. sheet covers 20 square feet. Size the job by laying out parts to minimize seams within one sheet before ordering.

Fit and Compatibility:

Use with a suitable substrate such as particleboard or MDF for standard, vertical, postform and Chemsurf grades, bonded with contact adhesive. Compact HPL items are self-supporting. Matching Wilsonart backer laminate is recommended on the underside of countertops to balance the panel; sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in one order unit?
A: One laminate sheet or compact panel in the finish, grade and size selected.

Q: Which grade should I choose for a countertop?
A: Use 350 Postform HPL for rolled front edges, 107 Standard HPL for flat horizontal work, and 514/568 Compact HPL where a self-supporting 1/2 in. panel is desired.

Q: Do I need a substrate?
A: Standard, vertical, postform and Chemsurf grades require bonding to a stable substrate such as particleboard or MDF; compact grades can be used without one.

Q: How do I bond this laminate?
A: Shop-fabricators typically use contact adhesive applied evenly to both the substrate and the laminate back, then roll the sheet firmly.

Q: What finishes are available?
A: This design is listed in 38 Fine Velvet Finish and 60 Matte Finish; finish availability varies by grade and size.

Q: How long is the lead time?
A: This is a special-order item; if not in stock locally, allow approximately 2 weeks for delivery.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For countertops, choose 350 Postform HPL in Fine Velvet for a rolled front edge and a low-sheen, easy-care surface; specify 60 x 96 or 60 x 120 stock for single-piece kitchen runs to keep seams off the main work area. Bond to 3/4 in. particleboard with contact adhesive and apply a backer sheet to the underside to prevent warping. Pick 1/2 in. compact panels for shower or partition-style self-supporting work, and Chemsurf for lab tops.

Cut laminate edges are sharp and cutting produces fine dust; wear gloves, eye protection and a dust mask, and score-and-snap or machine-cut with a fine-tooth blade on a stable surface.

Order Wilsonart 4947 Raw Cotton laminate in the grade, finish and sheet size your project needs.