Wilsonart 4876 Sheer Mesh Decorative Laminate Sheet, Small Grid Pattern, Multiple Grades and Sizes

Wilsonart 4876 Sheer Mesh is a specialty decorative high-pressure laminate with a small scale grid pattern woven from warm white and grey tones. It is offered in Fine Velvet and Matte finishes across standard, vertical, postforming, Chemsurf, compact and RE-COVER grades, with sheet sizes from 30 in. x 96 in. up to 60 in. x 144 in. Each variant is sold as one sheet; pair it with a matching Wilsonart edge band for finished edges.

Key Features:

• Grid weave pattern: A small scale grid design created by a weave of warm white and grey tones.
• Two finish choices: Available in 38 Fine Velvet Finish and 60 Matte Finish.
• Six grade options: Offered in 107 Standard, 335 Vertical, 350 Postform, 390 Chemsurf, 568 Compact and 735 RE-COVER Vertical HPL.
• Wide size range: Sheet sizes run from 30 in. x 96 in. to 60 in. x 144 in., with compact panels in 1/2 in. thickness.
• Self-supporting panels: The 568 Compact HPL grade is available in 1/2 in. thick panels for self-supporting applications.
• Fabrication friendly: Standard and postforming grades can be bonded to substrates such as particleboard or MDF for countertops and cabinetry.

Specifications Table:

Coverage & How Much You Need:

One 48 in. x 96 in. sheet covers 32 sq ft; a 60 in. x 144 in. sheet covers 60 sq ft. Size the job by laying out parts on the sheet so cut areas share a common grain direction.

Fit and Compatibility:

Bond with contact adhesive to a flat substrate such as 45 lb particleboard or MDF; use HPL backer sheet on the underside of countertops to balance the panel. Compact grade panels can be used self-supporting without a substrate. Chemsurf and fire-rated requirements are addressed by other designs in the series, not by a certification claimed on this page.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One laminate sheet in the finish, grade and size you select from the available variants.

Q: Which grade should I choose for a countertop?
A: Choose 350 Postform HPL if you plan to roll the front edge, or 107 Standard HPL for a square-edge build-up on a flat deck.

Q: Can I use this laminate without a substrate?
A: Only the 568 Compact HPL panels in 1/2 in. thickness are designed to be self-supporting; standard grades must be bonded to a substrate.

Q: What finish is best for high-use work surfaces?
A: Both offered finishes are functional; Fine Velvet has a low-sheen feel and Matte is flat, so pick based on the look you want.

Q: Is this an in-stock item?
A: It is a special order non-standard option; if not stocked locally, allow approximately two weeks for delivery with a 24-hour cancellation window.

Q: How do I avoid warping a laminate countertop?
A: Bond a balancing backer sheet to the underside of any standard-grade application and keep both faces of the panel bonded.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Sheer Mesh reads as a quiet, fine-scale neutral that works well on large decks and cabinet runs because the weave does not demand seam alignment. For postformed edges confirm your equipment can hold the tight inner radius before ordering the 350 grade. Lay out seams so grid pattern meets cleanly, and always balance-bond backs to prevent warp. For wet bars or lab-type work, step up to the 390 Chemsurf variant.

Large laminate sheets are heavy and edges are sharp; carry and cut them with a helper, gloves and eye protection in a dust-controlled shop.

Order Wilsonart 4876 Sheer Mesh laminate in the finish, grade and sheet size your project needs.