Wilsonart 4843 Misted Zephyr High-Pressure Laminate Sheets, 30-60 in. Widths x 96-144 in. Lengths, Grey Stipple Pattern

Wilsonart 4843 Misted Zephyr is a high-pressure laminate design that pairs a grey base with a fine blue-grey stipple for a small-scale pattern with subtle texture. This page sells the design in a choice of Matte or Fine Velvet Finish and multiple grades including standard, vertical, postform, Chemsurf, compact, fire-rated and RE-COVER sheets. One order unit is a single sheet; pair with a matching backer sheet and contact adhesive for balanced panel construction.

Key Features:

• Subtle Textured Pattern: A grey base design merged with a fine blue-grey stipple creates a small-scale pattern with subtle texture.
• Choice of Finishes: Offered in 60 Matte Finish and 38 Fine Velvet Finish.
• Multiple HPL Grades: Available in standard, standard high wear, vertical, postform, postform high wear, Chemsurf, compact, fire-rated vertical, fire-rated postform and RE-COVER vertical grades.
• Wide Size Range: Sheet sizes span 30 in. x 96 in. up to 60 in. x 144 in., with 1/2 in. compact panels in 48 in. or 60 in. widths.
• Compact 1/2 in. Panels: 568 Compact HPL items are 1/2 in. thick self-supporting panels.
• Countertop Ready: Postform grade items are made for rolled-edge countertop work.

Specifications Table:

Coverage & How Much You Need:

One sheet covers up to 60 sq. ft. for a 48 in. x 96 in. sheet or 60 sq. ft. plus for 60 in. x 120 in. and 60 in. x 144 in. sheets; size your job by adding saw kerf and trim allowance of a few inches per side. A 60 in. x 144 in. sheet covers a long countertop run plus backsplash material.

Fit and Compatibility:

Laminate sheets bond to particleboard, MDF or plywood substrates with contact adhesive; a matching or neutral backer sheet should be applied to the opposite face to prevent warping. This design is a standalone surface, not part of a snap-together system, and sheet stock may be special order with approximately a 2-week lead time when not stocked locally.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One laminate sheet in the finish, grade and size you select; adhesives, backer sheets and substrate are sold separately.

Q: Which grade should I choose for countertops?
A: Use 107 Standard HPL or 350 Postform HPL; choose 350 Postform for rolled front edges and 107 Standard High Wear for heavy-duty horizontal wear.

Q: What sizes are available?
A: The design is offered in twelve sheet sizes, from 30 in. x 96 in. through 60 in. x 144 in., plus 1/2 in. compact panels in 48 in. x 120 in. and 60 in. x 120 in.

Q: How is it installed?
A: Cut with a carbide-tipped blade, then bond to particleboard or MDF with contact adhesive and roll or press firmly; use a backer sheet on the underside to balance the panel.

Q: Is this a fire-rated option?
A: Yes, 604 Fire Rated Vertical HPL and 605 Fire Rated Postform HPL variants are listed for code-required interiors.

Q: Is any lead time involved?
A: The design is a special-order option; if not in stock locally, allow approximately a 2-week lead time, with a 24-hour window to cancel the special order.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Choose 350 Postform grade if you are building a countertop with a rolled bullnose front, and match the finish to your edge-forming radius since Fine Velvet and Matte both handle postforming. Always laminate a backer sheet to the underside of particleboard or MDF substrates so the panel stays flat, and plan seams on long runs where sheets can be butted over a build-up. Handle 60 in. x 144 in. sheets with two people and cut to rough size before final bonding to make shop handling easier.

Wear gloves, eye protection and a dust mask when cutting laminate, as freshly cut edges are sharp and cutting dust is a respiratory irritant.

Order Wilsonart 4843 Misted Zephyr laminate in the finish, grade and sheet size your project needs.