Skip to content
Wilsonart 3181 Fossil Cabinet Liner Sheet, .024 in. Backer Laminate, 48 in. x 96 in.
Regular price $31.07Orders start at $399 — combine any items to reach the minimum. Learn more
Wilsonart 3181 Fossil Cabinet Liner Sheet, .024 in. Backer Laminate, 48 in. x 96 in.
Wilsonart 3181 Fossil is a .024 in. thick cabinet liner laminate in a 48 in. x 96 in. paper-core sheet with a phenolic resin for a smooth aesthetic. One sheet per order. Use it to line cabinet interiors or as a balancing backer beneath laminate countertops.
Key Features:
- Smooth finish: Phenolic resin construction gives a smooth aesthetic for cabinet interiors.
- Lightweight liner: Thin .024 in. gauge keeps cabinet doors and drawers easy to operate.
- Full sheet size: 48 in. x 96 in. sheet provides about 32 sq. ft. of coverage.
- Earthy Fossil tone: Fossil design lends a warm neutral to cabinet interiors.
- Balancing use: Works as a backer laminate to balance laminate-faced panels.
- Easy fabrication: Paper-core sheet cuts and trims with standard laminate tooling.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Wilsonart |
| Manufacturer model | 3181 |
| Sell unit | 1 sheet |
| Design number | 3181 |
| Design name | Fossil |
| Available finishes | .024 in. Cabinet Liner |
| Available grades | 48 in. W x 96 in. L |
| Thickness | .024 in. |
| Nominal size | 48 in. x 96 in. |
| Surface / pattern | Smooth aesthetic, Fossil color |
| Recommended use | Cabinet liner / backer laminate |
Coverage & How Much You Need:
One 48 in. x 96 in. sheet covers roughly 32 sq. ft. of liner surface. Sketch cabinet interior faces, group similar pieces, and add trim allowance when ordering.
Fit and Compatibility:
Bond with contact adhesive to plywood, particleboard or MDF, or use beneath Wilsonart HPL sheets as a balancing backer. Face laminate, adhesive and substrate sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 48 in. x 96 in. Wilsonart 3181 Fossil cabinet liner sheet at .024 in. thickness.
Q: How much area does one sheet cover?
A: Approximately 32 sq. ft. before trimming.
Q: How thick is the liner?
A: It is printed at .024 in. thick.
Q: How is it applied?
A: Cut to fit and bond with contact adhesive to a clean, flat cabinet surface, rolling from the center outward.
Q: Can it serve as a countertop backer?
A: Yes, thin liner laminate is commonly used on the underside of countertops to balance the panel and reduce warping.
Q: What color is Fossil?
A: Fossil is the design's tone name; the manufacturer describes the sheet as smooth with a phenolic resin.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Acclimate the liner flat near the job before gluing, since thin sheets follow the substrate. Fill and sand any substrate defects first, then apply contact adhesive to both surfaces and roll firmly. Match drawer and door interiors to the cabinet box liner for a finished look.
Use contact adhesive only with adequate ventilation and away from ignition sources; wear gloves when trimming laminate.
Order Wilsonart 3181 Fossil cabinet liner and give cabinet interiors a smooth, warm neutral finish.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
