Wilsonart 1787 Oxide Metallic High-Pressure Laminate Sheet, Orange Clay Rust, 30 x 96 in. to 60 x 144 in., Matte Finish, Multiple Grades

Wilsonart Oxide (design 1787) is a large scale oxidized metallic high-pressure laminate in an overall orange, clay and rust hue with golden accents, finished in 60 Matte. Choose from 40 listed variants across Standard, High Wear, Vertical, Postform, Chemsurf and fire-rated grades in sheet sizes from 30 x 96 in. to 60 x 144 in. One sheet per order for countertops, walls, labs and code-required interiors.

Key Features:

• Oxidized metal look: A large scale oxidized metallic design with light and dark variations across the sheet.
• Warm rust tones: Carries an overall orange, clay and rust hue with accents of golden tones.
• Matte finish: Offered in the 60 Matte Finish for a smooth, low-sheen surface.
• Chemical-resistant option: 390 Chemsurf HPL is designed for surfaces exposed to harsh chemicals, such as laboratory worktops.
• Fire-rated options: 604 Fire Rated Vertical and 605 Fire Rated Postform HPL are for interiors where a fire rating is required by code.
• High wear options: 107 Standard High Wear and 350 Postform High Wear grades offer a tougher surface for heavy-use horizontal tops.
• Wide size range: Ten sheet sizes from 30 x 96 in. to 60 x 144 in. help minimize seams on any layout.

Specifications Table:

Coverage & How Much You Need:

Coverage depends on sheet size, from 20 sq. ft. for a 30 x 96 in. sheet up to 60 sq. ft. for a 60 x 144 in. sheet. Pick the largest size your layout allows to reduce seams across backsplashes and long tops.

Fit and Compatibility:

Bonds to particleboard, MDF or plywood substrates with contact adhesive; pair with a balancing backer sheet on islands and wide panels. Postforming grades are for rolled-edge work, Chemsurf for chemical-exposed lab surfaces, and fire-rated grades where codes require them. With 40 variants, confirm the grade and size item code for your job.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One laminate sheet in the finish, grade and size you select; adhesive, substrate and backer sheets are sold separately.

Q: Which grade is best for a restaurant countertop?
A: Choose 107 Standard High Wear or 350 Postform High Wear HPL for heavy-use horizontal tops that need extra abrasion resistance.

Q: Can this laminate be used in a laboratory?
A: Yes, the 390 Chemsurf HPL grade is intended for surfaces exposed to harsh chemicals such as lab worktops.

Q: Is there a fire-rated version?
A: Yes, 604 Fire Rated Vertical HPL and 605 Fire Rated Postform HPL variants are listed for interiors where code requires a fire rating.

Q: What sizes can I order?
A: Ten sizes are offered, from 30 x 96 in. up to 60 x 144 in., depending on the grade; check the variant list for availability.

Q: What is the lead time?
A: This is a special-order design; allow approximately 2 weeks for delivery if not in stock locally, with a 24-hour cancellation window.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Oxide makes a striking feature surface, so let it run full height on bar fronts and accent walls where the large-scale pattern can read without interruption; expect visible design variation sheet to sheet, which suits the oxidized look. For service tops specify the High Wear grade, and use Chemsurf wherever cleaners and solvents will land. Cut metallic laminates with a fine-tooth blade from the face side and always balance the panel with a backer sheet.

Follow fire code and local building requirements when specifying fire-rated grades, use ventilation with contact cement, and handle cut laminate edges carefully as they can be sharp.

Order Wilsonart Oxide metallic laminate today for a bold oxidized metal surface on your next build.