Wilsonart 17012K Mercer Oak High-Pressure Laminate Sheet, Warm Grey Oak, 48 x 96 in. and Larger, Aligned Oak Finish

Wilsonart Mercer Oak (design 17012K) is a standard high-pressure laminate sheet in a medium grey oak with shades of warm grey and an embossed, aligned texture. Choose from 366 HD Vertical or 376 HD Postform grade in 48 x 96 in. or 60 x 144 in. sheets, one sheet per order. Bond it to particleboard, MDF or plywood for countertops, cabinet sides and wall surfaces.

Key Features:

• Warm grey oak: Mercer Oak is a medium grey oak design rendered in shades of warm grey.
• Embossed texture: The design is enhanced by an embossed and aligned texture that follows the oak grain.
• Vertical grade option: 366 HD Vertical HPL is intended for cabinet sides, wall surfaces and other vertical applications.
• Postform grade option: 376 HD Postform HPL is made for horizontal countertops with rolled postformed edges.
• Two sheet sizes: Available in 48 x 96 in. and 60 x 144 in. sheets to minimize seams on larger projects.
• Special order: If not in stock locally, allow approximately a 2-week lead time for delivery.

Specifications Table:

Coverage & How Much You Need:

A 48 x 96 in. sheet covers 32 sq. ft.; a 60 x 144 in. sheet covers 60 sq. ft. before trimming waste. Plan layout so seams and grain direction fall where you want them before cutting.

Fit and Compatibility:

This laminate bonds to particleboard, MDF or plywood substrates using contact adhesive; use a balancer or backer sheet on the underside of panels to prevent warping. Postforming grade is intended for rolled-edge work on a postforming line; vertical grade suits flat vertical installation. It pairs with matching Wilsonart designs in the oak program for coordinated surfaces.

Frequently Asked Questions (FAQ):

Q: What is included with my order?
A: One laminate sheet in the grade, finish and size you select; adhesive, substrate and backer sheets are sold separately.

Q: Which grade should I choose?
A: Choose 376 HD Postform HPL for countertops that will be rolled on the front edge, and 366 HD Vertical HPL for cabinet ends, wall panels and other vertical surfaces.

Q: What size sheet do I need?
A: Measure your finished top or panel and add overhang for trimming; pick 48 x 96 in. for typical counters and 60 x 144 in. for islands or long runs with fewer seams.

Q: How is it installed?
A: Cut the sheet slightly oversize, apply contact adhesive to both the laminate and substrate, then roll or press the surfaces together firmly and trim the edges flush.

Q: How long does delivery take?
A: This is a special-order design; if not in stock locally, allow approximately a 2-week lead time, with a 24-hour window to cancel the special order.

Q: Is the texture only cosmetic?
A: No, the aligned oak texture is embossed into the surface so the grain pattern has tactile depth as well as visual detail.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Mercer Oak works well on contemporary cabinet jobs where a grey woodgrain is wanted without the cost of real veneer. For countertops, order postforming grade and keep the embossed grain running along the length of the top; for tall cabinet doors and ends, vertical grade is the right pick. Always bond a backer sheet to the underside of islands and wide panels so moisture imbalance does not warp the core, and rough-cut sheets oversize before gluing because contact adhesive grabs on contact.

Use adequate ventilation and follow adhesive manufacturer precautions when working with contact cement, and handle sheet edges carefully as cut laminate edges are sharp.

Order Wilsonart Mercer Oak laminate today and bring a warm grey oak look to your next countertop or cabinet project.