Wilsonart 1500K Grey Solid Color High-Pressure Laminate Sheet, Up to 60 in. x 144 in., Multiple Finishes and Grades

Wilsonart Grey (design 1500K) is a solid grey high-pressure laminate sold as a single sheet in your choice of 13 listed variants. Choose from seven finishes, four HPL grades (standard, vertical, postform and HD postform) and sheet sizes up to 60 in. x 144 in. Pair it with a suitable substrate such as particleboard or MDF and contact adhesive.

Key Features:

• Solid Grey Color: A uniform, solid grey laminate design suited to both contemporary and traditional interiors.
• Seven Finish Options: Available in 01 High Gloss Finish + Film, 07 Textured Gloss, 12 Softgrain, 18 Linearity, 21 Soft Silk, 28 Gloss Line and 55 Glaze finishes.
• Four HPL Grades: Offered in 107 Standard HPL, 335 Vertical HPL, 350 Postform HPL and 376 HD Postform HPL.
• Large Sheet Sizes: Sheet sizes include 60 in. x 96 in., 60 in. x 120 in. and 60 in. x 144 in.
• Postform Ready: Postform grade items are intended for rolled-edge countertop work on a postforming line.
• Fabricator Friendly: Standard HPL sheets bond to substrate with contact adhesive for countertops, casework and panels.

Specifications Table:

Coverage & How Much You Need:

One 60 in. x 144 in. sheet covers 60 square feet; a 60 in. x 120 in. sheet covers 50 square feet and a 60 in. x 96 in. sheet covers 40 square feet. Plan cut parts to minimize seams and allow a small trim allowance on each edge.

Fit and Compatibility:

This is a laminate surfacing sheet, not a finished countertop; it must be bonded to a substrate such as particleboard or MDF using contact adhesive, with laminate backer sheet recommended on the underside to prevent warping. Grade and finish are set by the variant ordered, and postforming grades require appropriate postforming equipment.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One laminate sheet in the finish, grade and size variant you select at ordering.

Q: Which grade should I choose for countertops?
A: Use 350 Postform HPL for rolled-edge countertops, 107 Standard HPL for square-edge horizontal work, and 335 Vertical HPL for cabinet sides and wall surfaces; 376 HD Postform HPL is a heavy-duty postforming option.

Q: What sizes are available?
A: Listed sheet sizes are 60 in. x 96 in., 60 in. x 120 in. and 60 in. x 144 in., depending on the finish and grade variant.

Q: How is it installed?
A: Cut to size, then bond to a substrate such as particleboard or MDF with contact adhesive; keep a laminate backer on the opposite face of doors and panels to reduce warping.

Q: Is this a stocked item?
A: It is listed as a special-order, non-standard option; if not in stock locally, allow approximately a 2-week lead time for delivery, and note a 24-hour window to cancel a special-order laminate.

Q: What thickness is the sheet?
A: No thickness is printed in the available sources for this design, so it is not stated here.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For countertop work, order the 350 Postform grade so the sheet can be rolled over the front edge on a postforming line, and match the finish to the shop's capability since gloss finishes need careful handling to avoid swirl marks. Bond to a flat, dimensionally stable particleboard or MDF core with contact adhesive, and always laminate a backer sheet to the underside of door leaves or wide panels to keep them flat. With a solid grey, seams show cleanly, so lay out parts to put seams in low-visibility areas and trim edges flush with a router and bearing-guided bit.

Cut laminate edges and trimmed corners are sharp, so wear cut-resistant gloves and eye protection when handling, routing and trimming sheets.

Order the Wilsonart 1500K Grey laminate sheet in your preferred finish, grade and size today.