Wilsonart 10776K Kensington Maple High-Pressure Laminate Sheets, 48 x 96 in. and 60 x 144 in., Multiple Finishes and Grades

Wilsonart 10776K Kensington Maple is a high-pressure laminate design showing a large planked maple in a natural blond color with peach undertones and large-scale grain movement. The design is offered in three finishes, three grades and two sheet sizes, sold as a single sheet in the variant you choose. Pair it with matching Wilsonart backer sheet and contact adhesive for countertop or casework layup.

Key Features:

• Planked maple look: A large planked maple pattern in a natural blond color with peach undertones and large-scale movement in the grain.
• Three finishes: Choose 01 High Gloss Finish + Film, 07 Textured Gloss Finish or 78 Fine Grain Finish.
• Postforming grade: 350 Postform HPL is made for rolling over the front edge of a substrate on countertop builds.
• Vertical grade: 335 Vertical HPL suits cabinet sides, doors and wall surfaces.
• Re-cover option: 735 RE-COVER Vertical HPL is available in Fine Grain Finish for resurfacing existing vertical surfaces.
• Two sheet sizes: Available in 48 in. x 96 in. and 60 in. x 144 in. sheets depending on the variant.

Specifications Table:

Coverage & How Much You Need:

One 48 in. x 96 in. sheet covers 32 sq. ft.; one 60 in. x 144 in. sheet covers 60 sq. ft. Plan your layout so seams fall in inconspicuous areas and allow trim allowance around the perimeter of each surface.

Fit and Compatibility:

This is a surfacing material bonded to a substrate such as particleboard or MDF with contact adhesive; substrate, adhesive, edge banding and backer sheets are sold separately. Use 350 Postform HPL with postforming equipment and 335 or 735 grades for vertical work. Confirm the finish, grade and size variant before ordering, as items are made to order.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One laminate sheet in the finish, grade and size you select; adhesive, substrate and backer sheet are not included.

Q: Which grade should I pick for a countertop?
A: Choose 350 Postform HPL when you plan to roll the laminate over a rounded front edge; use 335 Vertical HPL for cabinet sides, doors and wall panels.

Q: What is the 735 RE-COVER grade for?
A: It is a vertical-grade laminate intended for resurfacing existing vertical surfaces, offered in Fine Grain Finish on this design.

Q: How long does delivery take?
A: This is a special-order, non-standard option; if not in stock locally, allow approximately a 2-week lead time, with a 24-hour window to cancel.

Q: How do I size my order?
A: A 48 in. x 96 in. sheet covers 32 sq. ft. and a 60 in. x 144 in. sheet covers 60 sq. ft.; sketch each surface and add trim allowance before choosing a size.

Q: What adhesive do I use?
A: Standard practice is contact adhesive applied to both the substrate and the laminate back; follow the adhesive manufacturer's coverage and drying instructions.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For countertops with a rolled front edge, order the 350 Postform grade and confirm your postforming machine's minimum radius before committing to the High Gloss + Film finish, which is less forgiving on the radius. For casework and wall panels, the 335 vertical grade in Fine Grain Finish is the workhorse choice. Always balance-bond a backer sheet on the opposite face of the substrate to prevent warping, and let large 60 x 144 sheets acclimate in the shop before cutting.

Laminate edges and cut offs are sharp; wear cut-resistant gloves and eye protection when cutting and handling large sheets, and use adequate ventilation when applying contact adhesive.

Order Wilsonart Kensington Maple laminate in the finish, grade and sheet size your project needs.