Skip to content
Western Colloid 6 in. x 300 ft. 272 Heavy Soft Stitchbonded Polyester Fabric Roll
Regular price $245.23Orders start at $399 — combine any items to reach the minimum. Learn more
Western Colloid 6 in. x 300 ft. 272 Heavy Soft Stitchbonded Polyester Fabric Roll
This Western Colloid 272 heavy soft stitchbonded polyester fabric comes in a 6-inch-wide by 300-foot roll for roof reinforcement details such as seams, flashings and penetrations. It meets ASTM D1682, D3786 and D1117 testing standards. One sell unit is one roll, weighing approximately 1 lb.
Key Features:
- Detail reinforcement: 6-inch width is sized for seam, flashing and penetration details in roof coatings systems.
- 300-foot roll: One roll delivers up to 300 linear feet of reinforcing fabric.
- Stitchbonded polyester: Heavy soft stitchbonded polyester construction for coating embedment.
- ASTM tested: Applicable standards include ASTM D1682, ASTM D3786 and ASTM D1117.
- Heavy weight: The 272 Heavy grade provides reinforcement for coating systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Western Colloid |
| Sell unit | 1 roll, 6 in. x 300 ft. |
| Product line | 272 Heavy Soft |
| Material | Polyester |
| Dimensions | 6 in. wide x 300 ft. long |
| Weight | 1 lb (roll) |
| Applicable standards | ASTM D1682; ASTM D3786; ASTM D1117 |
| Intended use | Reinforcing fabric for roof coating details and seams |
| Pack quantity | 1 |
Coverage & How Much You Need:
One roll provides up to 300 linear feet of 6-inch-wide fabric, enough for approximately 150 square feet of reinforcement at full width. Use overlaps per the coating manufacturer's instructions when sizing a job.
Fit and Compatibility:
Designed for embedment within Western Colloid roof coating and restoration systems; apply over a wet base coat of compatible coating and top-coat to fully encapsulate. Sold as fabric only; coatings are ordered separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One roll of 6 in. x 300 ft. 272 Heavy Soft stitchbonded polyester fabric.
Q: How far does one roll go?
A: Up to 300 linear feet of 6-inch-wide reinforcement, about 150 square feet of area.
Q: What is it used for?
A: It reinforces seams, flashings and penetrations within roof coating systems.
Q: How is it installed?
A: Embed the fabric into a wet coat of compatible coating, then apply a top coat to fully encapsulate it.
Q: What standards does it meet?
A: Testing standards include ASTM D1682, ASTM D3786 and ASTM D1117.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
A 6-inch stitchbonded polyester detail fabric is the standard choice for flashing laps, seams and penetrations because its soft hand conforms readily to irregular surfaces. Always roll the fabric into wet coating with no wrinkles and encapsulate it completely to avoid pinholes. Size the roll count from linear footage of details plus lap allowance, typically cutting a little extra for corners.
Follow the coating system's safety data sheet for ventilation and protective equipment during wet-embedment work on the roof.
Order the Western Colloid 272 heavy soft polyester fabric roll for reinforced roof details.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
