Skip to content
Warrior 30# Type II Felt Underlayment ASTM D226, 2 Square Roll, Black
Regular price $44.50Orders start at $399 — combine any items to reach the minimum. Learn more
Warrior 30# Type II Felt Underlayment ASTM D226, 2 Square Roll, Black
Warrior 30# Type II felt underlayment is an asphalt-saturated organic felt that meets ASTM D226 and adds an extra moisture barrier against wind-blown rain. Each roll covers 2 squares and is heavy-duty yet slip resistant. Install beneath shingles as a secondary water-shedding layer.
Key Features:
- ASTM D226 Type II: Manufactured to meet ASTM D226 Type II specification for 30-pound felt.
- Moisture barrier: Provides an extra moisture barrier to wind-blown rain while remaining permeable.
- Asphalt saturated: Asphalt-saturated material made of recycled paper and asphalt for excellent waterproofing.
- Lays flat: Heavy-duty felt design lays flat and minimizes wrinkling during installation.
- Slip resistant: Slip-resistant surface helps installers keep their footing on the roof.
- 2 square roll: Each roll covers 2 squares (200 sq ft) of roof deck.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Warrior |
| Sell unit | 1 roll, 2 squares |
| Product line | Warrior Type II Felt 30# |
| Standard | ASTM D226 Type II |
| Available colors | Black |
| Available sizes | 2 square roll |
| Material | Asphalt-saturated organic felt (recycled paper and asphalt) |
| Finish / texture | Black felt, slip resistant |
| Coverage per unit | 2 squares (200 sq ft) per roll |
| Permeance | Permeable |
| Intended use | Shingle underlayment / secondary moisture barrier for residential roofing |
Coverage & How Much You Need:
One roll covers 2 squares, or 200 sq ft of roof deck. Divide total roof area in squares by 2 and add allowance for laps at eaves and in valleys per code requirements.
Fit and Compatibility:
Use under asphalt shingles and other steep-slope roof coverings. Pair with drip edge and starter products; self-adhered ice-and-water membrane may be required at eaves in cold climates per local code.
Frequently Asked Questions (FAQ):
Q: What does one roll cover?
A: Each roll covers 2 squares, approximately 200 sq ft of roof area.
Q: Does it meet a standard?
A: Yes, it is a 30# Type II felt manufactured to ASTM D226.
Q: Is it waterproof?
A: The asphalt-saturated felt provides an extra moisture barrier to wind-blown rain, but it is permeable and is not a substitute for a fully waterproof membrane.
Q: How is it installed?
A: Roll it horizontally over the deck with the required laps, fasten per code and manufacturer instructions, and install shingles over it.
Q: Why 30# instead of 15# felt?
A: The heavier 30-pound construction lays flatter, minimizes wrinkling and provides a thicker, more robust moisture barrier.
Q: Is the surface slippery?
A: No, the felt is slip resistant to help installer footing.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Order one roll per 2 squares and add 5-10% for laps at eaves, rakes and valleys. Install from the eave upward so upper courses shed water over lower laps. In cold climates, pair with a self-adhered membrane at eaves and valleys where ice damming is a concern.
Felt underlayment can be slippery, especially when wet or dusty; wear proper footwear and fall protection while installing.
Get Warrior 30# Type II ASTM D226 felt underlayment rolls for dependable secondary moisture protection under your shingles.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
