Skip to content
Verde Steel Roof to Wall Flashing, 26 Gauge Mill Finish, Multiple Sizes
Regular price $13.70Orders start at $399 — combine any items to reach the minimum. Learn more
Verde Steel Roof to Wall Flashing, 26 Gauge Mill Finish, Multiple Sizes
Verde Steel Roof to Wall Flashing is a 26-gauge galvanized steel transition flashing in mill finish, designed to seal the joint where a roof plane meets a vertical wall. It is offered in three profiles: 2 in. x 6 in., 3 in. x 5 in. 110-degree, and 4 in. x 5 in. 110-degree. Each order unit is one piece.
Key Features:
- Durable 26-gauge steel: Formed from 26-gauge steel for long-lasting roof-to-wall protection.
- Mill finish: Supplied in a mill finish that suits painting or leaving exposed on many roof assemblies.
- Three profiles: Available in 2 in. x 6 in. and 110-degree 3 in. x 5 in. and 4 in. x 5 in. profiles to match different roof pitches and wall details.
- Transition sealing: Directs water away from the vulnerable intersection of roof and sidewall.
- Per-piece ordering: Sold by the piece so you can order exactly the quantity your job requires.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Verde |
| Sell unit | 1 piece |
| Product line | Verde Steel Roof to Wall Flashing |
| Available colors | Mill |
| Available sizes | 2" x 6" 26 GA; 3" x 5" 26 GA 110 degree; 4" x 5" 26 GA 110 degree |
| Material | Steel, 26 gauge |
| Finish / texture | Mill |
| Dimensions | 2 in. x 6 in., 3 in. x 5 in. (110 degree), or 4 in. x 5 in. (110 degree) |
| Intended use | Roof-to-wall transition flashing |
| Category | Residential Roofing > Flashing > Transition Flashing |
Coverage & How Much You Need:
Each piece covers the linear run of the roof-to-wall joint it is installed over, lapped shingle-style with adjacent flashing pieces; order one piece per section of transition, overlapped per good flashing practice.
Fit and Compatibility:
Pairs with Verde steel roofing and standard residential shingle or metal roof assemblies at sidewall and transition details. Underlayment and fasteners are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One piece of roof-to-wall flashing in the selected size; no fasteners or sealant are included.
Q: Which size should I choose?
A: Use 2 in. x 6 in. for standard transitions, or the 110-degree 3 in. x 5 in. or 4 in. x 5 in. profiles where the roof-to-wall angle calls for an angled profile.
Q: Can this be painted?
A: The mill finish can typically be painted; follow paint manufacturer preparation instructions.
Q: What gauge is the metal?
A: All three sizes are formed from 26-gauge steel.
Q: Is sealant included?
A: No; apply compatible roofing sealant per the assembly's flashing detail.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Choose the 110-degree profiles when the roof-to-wall transition is not flat, since the pre-bent angle follows the geometry better than flat stock. Overlap successive pieces at least a few inches and integrate with underlayment and step or apron flashing. On exposed installations, the mill finish can be painted to match surrounding trim.
Wear gloves when handling flashing; cut metal edges are sharp.
Order Verde Steel Roof to Wall Flashing today and seal your roof-to-wall transitions with confidence.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
