USG Sheetrock Easy Sand Setting-Type Joint Compound, 18 lb Bag, 5, 20 and 45 Minute
Regular price $12.85Orders start at $399 — combine any items to reach the minimum. Learn more
USG Sheetrock Easy Sand Setting-Type Joint Compound, 18 lb Bag, 5, 20 and 45 Minute
USG Sheetrock Easy Sand is a setting-type joint compound supplied as an 18 lb white powder bag in 5, 20 and 45 minute working times. Mix only what you need; it cures by chemical set rather than air drying, so patching and first coats go faster. Pair it with paper joint tape and Sheetrock ready-mixed compounds for finishing coats.
Key Features:
- Three working times: Available in 5, 20 and 45 minute formulations to match job pace.
- Setting-type chemistry: Chemically setting compound hardens by cure, not air drying, so coats can follow sooner.
- 18 lb bag: Each 18 lb bag mixes on demand, reducing waste on small jobs.
- Low shrinkage: Setting-type compounds characteristically shrink less than drying-type compounds in deep fills.
- White finish: Dries to a white finish that sands and paints normally.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | USG |
| Sell unit | 1 bag, 18 lb |
| Product line | USG Sheetrock Easy Sand |
| Available colors | White |
| Available sizes | 5 minute, 20 minute, 45 minute (18 lb bag) |
| Material | Vinyl |
| Color / finish | White |
| Coverage per unit | Per bag, varies by mixing rate and coat thickness |
| Pack quantity | 1 bag per sell unit |
| Intended use | Setting-type joint compound for patching, first coats and deep fills in drywall finishing |
| Product weight, complete sell unit | 18 lb |
Coverage & How Much You Need:
An 18 lb bag yields a practical amount of mixed compound for patching and tape-embedding on small to mid-size jobs; yield depends on water ratio and application thickness. For full-house taping, most contractors combine Easy Sand first coats with ready-mixed topping compound.
Fit and Compatibility:
Works with paper joint tape on USG Sheetrock brand gypsum panels and complements ready-mixed Sheetrock compounds for subsequent coats. Working time shortens in hot water or warm conditions, so mix accordingly.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 18 lb bag of white Easy Sand setting-type joint compound; choose 5, 20 or 45 minute working time.
Q: Which working time should I choose?
A: Use 5 or 20 minute for quick patches, and 45 minute for larger first-coat runs where more working time is needed.
Q: How do I mix it?
A: Mix powder into clean water to a smooth, workable consistency, and mix only what you can apply before it sets.
Q: Can I add more water after it starts to set?
A: No, re-tempering a setting compound after it begins to cure will weaken the set; discard stiffened material.
Q: Do I still need topping compound?
A: Most finish schedules use Easy Sand for embed and first coats, then ready-mixed topping or all-purpose compound for final coats.
Q: Is it good for patching holes?
A: Yes, its low-shrinkage chemical set makes it well suited to filling deep patches in one or two applications.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Easy Sand is the professional's choice for fast patch work and one-day tape jobs: the 20 minute grade covers most repairs, while 45 minute suits large first coats. Use cool water and clean tools to hold open time, and never pour leftovers down the drain. Follow with a ready-mixed topping coat for the smoothest sandable finish.
Setting compound dust contains silica-bearing gypsum dust; wear a NIOSH-approved dust mask and eye protection when mixing and sanding, and clean tools before the set hardens.
Stock up on USG Sheetrock Easy Sand 18 lb bags in 5, 20 or 45 minute working times for fast drywall finishing.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.


