Skip to content
Unified Steel 2 in x 2 in x 10 ft Drip Edge Flashing, Black
Regular price $10.66Orders start at $399 — combine any items to reach the minimum. Learn more
Unified Steel 2 in x 2 in x 10 ft Drip Edge Flashing, Black
This Unified Steel drip edge is a 2 in x 2 in profile formed in 10 ft lengths with a black finish. One piece per sell unit, it directs water off the roof edge and protects the fascia. At approximately 1.6 lb per piece, it installs quickly along eaves and rakes.
Key Features:
- 2 in x 2 in profile: Formed with 2 in horizontal and 2 in vertical flanges for standard roof edge detailing.
- 10 ft length: Long 10 ft pieces minimize joints along eaves and rakes.
- Black finish: Black finish blends with dark shingles and gutter systems.
- Edge water control: Directs runoff into gutters and away from the fascia.
- Lightweight piece: Approximately 1.6 lb per 10 ft piece for easy handling and installation.
- Industry association standards: Listed standards include USGBC membership, NRCA, MCA Certified and MRA Certified.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Unified Steel |
| Manufacturer model | 92470 |
| Sell unit | 1 piece, 10 ft |
| Profile / style | Drip edge, 2 in x 2 in |
| Color | Black |
| Length | 10 ft (120 in) |
| Dimensions | 2 in x 2 in x 120 in |
| Weight | 1.6 lb per piece |
| Approvals | U.S. Green Building Council Member; National Roofing Contractors Association; Metal Construction Association Certified; MRA Certified |
| Intended use | Roof edge flashing at eaves and rakes |
Coverage & How Much You Need:
One 10 ft piece covers 10 linear feet of roof edge. Measure the total eave and rake perimeter and divide by 10 ft, allowing for overlap at joints and mitered corners.
Fit and Compatibility:
Installs under the underlayment at the eave and over it at the rake per standard practice, pairing with the roof underlayment, shingle starter course and gutter system. Fasteners are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 10 ft piece of 2 in x 2 in drip edge flashing with a black finish.
Q: How many pieces do I need?
A: Divide your total roof edge length in feet by 10 and add for overlaps and corners.
Q: What profile is this?
A: A 2 in x 2 in drip edge formed in 120 in lengths.
Q: What color is it?
A: Black.
Q: Where is drip edge installed?
A: Along eaves and rakes to direct water off the roof edge and into the gutter, following manufacturer instructions and local code.
Q: How much does each piece weigh?
A: Approximately 1.6 lb per 10 ft piece.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use 2 in x 2 in drip edge for standard asphalt shingle edges; order one piece per 10 ft of eave and rake plus waste for miters. Install eave drip edge over the ice-and-water or underlayment edge per manufacturer instructions and local code, fastening every 8-12 in. Choose a color that matches the gutter or fascia; this black finish suits dark shingle and gutter schemes.
Cut metal edges are sharp; wear cut-resistant gloves and eye protection when handling and fastening drip edge.
Add the Unified Steel 2 in x 2 in black drip edge, 10 ft pieces, to your roof edge package.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
