Skip to content
Trim-Tex 350 Bullnose Splayed PVC Corner Bead 10 mm Radius, 135-Degree External Corner, 10 ft. – 35030
Regular price $110.32Orders start at $399 — combine any items to reach the minimum. Learn more
Trim-Tex 350 Bullnose Splayed PVC Corner Bead 10 mm Radius, 135-Degree External Corner, 10 ft.
This is a Trim-Tex 350 Bullnose Splayed PVC corner bead for unusual outside drywall corners, with a 10 mm bullnose radius and a 135-degree splayed angle. Each bead is 3000 mm (approximately 10 ft.) long and is supplied 35 beads per box. It softens outside corner appearance while creating a contemporary finished look.
Key Features:
- Splayed 135-degree: The splayed design suits unusual outside corners that are not a standard 90 degrees.
- 10 mm bullnose radius: The 10 mm bullnose edge softens the corner appearance for a contemporary look.
- Durable PVC: Rigid PVC construction will not rust or dent like metal beads.
- Long 10 ft. length: The 3000 mm (about 10 ft.) length means fewer splices on tall walls.
- 35 per box: Beads come packed 35 to a box for job-site quantities.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Trim-Tex |
| Manufacturer model | 35030 |
| Sell unit | 1 bead, 3000 mm (35 per box) |
| Material | PVC |
| Nominal size | 10 mm bullnose radius, 135-degree splayed external corner |
| Length | 3000 mm (approx. 10 ft.) |
| Type | Bullnose splayed corner bead (350 series) |
| Intended use | Finishing unusual (non-90-degree) outside drywall corners |
| Pack quantity | 35 beads per box |
Coverage & How Much You Need:
Each 3000 mm (about 10 ft.) bead covers one 10-foot splayed outside corner run. Measure your total outside-corner footage and divide by 10 ft. per bead to determine quantity; a full box covers roughly 350 linear feet.
Fit and Compatibility:
Part of the Trim-Tex PVC angles/350 bullnose bead line and finished with standard joint compound over the bead's tape ground. It is intended for 135-degree splayed outside corners; use standard bullnose beads for 90-degree corners. Fasteners or adhesive for attachment are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included with purchase?
A: Corner beads are packed 35 per box; each bead is 3000 mm (about 10 ft.) long.
Q: What corner angle does this bead fit?
A: It is designed for 135-degree splayed external corners, per the product listing.
Q: What is the bullnose radius?
A: This 350-series bead has a 10 mm bullnose radius.
Q: How is it installed?
A: Attach the bead to the outside corner and finish over it with joint compound following standard corner bead practice; Trim-Tex provides angle installation sheets for its beads.
Q: Will it rust?
A: No, it is made of PVC, so it will not corrode like galvanized metal beads.
Q: How many beads are in a box?
A: 35 beads per box.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use this splayed bullnose bead when an outside corner is opened to about 135 degrees and a standard 90-degree bullnose would not seat flush. Check the actual corner angle with a protractor before ordering, and fasten the bead evenly along both grounds so the nose stays straight. Pair with Trim-Tex spray adhesive or screws, then finish with two compound coats feathered well past the bead tape.
Cut PVC beads with snips or a fine-tooth saw and deburr edges; wear eye protection when cutting and fastening overhead.
Order Trim-Tex 350 Bullnose Splayed PVC corner bead for clean, softened finishes on unusual outside corners.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
