Skip to content
TRI-BUILT 26 Gauge 2 in. x 4 in. Galvanized Drip Edge Flashing, 10 ft.
Regular price $15.02Orders start at $399 — combine any items to reach the minimum. Learn more
TRI-BUILT 26 Gauge 2 in. x 4 in. Galvanized Drip Edge Flashing, 10 ft.
TRI-BUILT drip edge is a 10 ft. length of 26 gauge galvanized steel flashing with a 2 in. x 4 in. profile for eave and rake edges. Each piece is sold individually in a galvanized finish weighing about 4 lb. It installs under the first course of shingles at eaves and over underlayment at rakes to control water runoff.
Key Features:
- 10 ft Length: Each 10 ft. piece reduces laps along long eave and rake runs.
- 26 Gauge Steel: 26 gauge galvanized steel provides sturdy, kink-resistant edge flashing.
- 2 x 4 Profile: 2 in. roof deck flange and 4 in. face throw direct runoff clear of fascia.
- Galvanized Finish: Galvanized coating resists rust along the roof perimeter.
- Eave and Rake Use: Suitable for both eave and rake edge installations on shingle roofs.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | TRI-BUILT |
| Manufacturer model | TB1190X4-26 |
| Sell unit | 1 piece, 10 ft. |
| Product line | TRI-BUILT flashings |
| Profile / style | Drip edge |
| Color | Galvanized |
| Dimensions | 2 in. x 4 in. profile, 10 ft. length, 26 gauge |
| Material | Galvanized steel |
| Finish / texture | Galvanized |
| Weight | 3.99 lb |
| Intended use | Eave and rake edge flashing for shingle roofs |
Coverage & How Much You Need:
One piece covers 10 linear feet of roof edge. Measure total eave plus rake linear footage and divide by 10, adding about 5% for overlaps at joints and corner miters.
Fit and Compatibility:
Used with asphalt shingle roofing and pairs with TRI-BUILT underlayments, valley flashing and step flashing (sold separately).
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 10 ft. piece of 26 gauge galvanized drip edge with a 2 in. x 4 in. profile.
Q: How many pieces do I need?
A: Add your eave and rake linear footage, divide by 10, and add roughly 5% for overlaps and corners.
Q: How is drip edge installed?
A: At eaves it goes over the underlayment before shingles; at rakes it goes over the underlayment and eave metal, fastened with corrosion-resistant roofing nails.
Q: What material is it?
A: 26 gauge galvanized steel with a galvanized finish.
Q: Will it rust?
A: The galvanized coating provides corrosion resistance for typical edge flashing service.
Q: What does 2 x 4 mean on drip edge?
A: It describes the bend: a 2 in. deck flange and a 4 in. vertical face that throws water clear of the fascia.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Install drip edge at the eaves over the self-adhering or felt underlayment, then at rakes over the eave metal so rake laps shed onto the eave piece. Fasten about every 12 in. with roofing nails and keep the face plumb for a clean runoff line. A 26 gauge 2 x 4 is a solid general-purpose choice; go larger profile or heavier gauge where ice dams or wind-driven rain are concerns.
Drip edge ends and cut edges are sharp; wear cut-resistant gloves and eye protection when handling and cutting.
Order TRI-BUILT 10 ft. 26 gauge galvanized 2 x 4 drip edge to finish your eave and rake edges right.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
