Skip to content
TRI-BUILT 0.09 in x 10 ft Lip Termination Bar
Regular price $11.72Orders start at $399 — combine any items to reach the minimum. Learn more
TRI-BUILT 0.09 in x 10 ft Lip Termination Bar
This TRI-BUILT lip termination bar mechanically secures the edge of single-ply membrane roofing at parapets and terminations. Each bar measures 10 ft long with a 0.09 in (0.090) profile and fastens on a 6 in on-center pattern. Order one piece per 10 ft of termination edge; fasteners and sealant are sold separately.
Key Features:
- Membrane terminations: Designed to mechanically terminate and hold the free edge of single-ply roofing membrane.
- 10 ft length: Each piece spans 10 ft, covering termination runs with fewer laps.
- 0.09 in profile: Nominal 0.09 in thickness for the lip profile as listed.
- 6 in OC pattern: Item description calls for fastening at 6 in on center along the bar.
- Light handling weight: Gross weight listed at 1.72 lb per piece for easy handling on the roof.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | TRI-BUILT |
| Manufacturer model | LIPTB06-TRI |
| Sell unit | 1 bar, 0.09 in x 10 ft |
| Product line | TRI-BUILT termination bar |
| Profile / style | Lip termination bar |
| Nominal size | 0.09 in x 10 ft |
| Length | 10 ft |
| Thickness | 0.09 in |
| Fastening | 6 in on center |
| Weight | 1.72 lb per piece |
| Intended use | Single-ply membrane edge termination |
Coverage & How Much You Need:
One 10 ft bar terminates 10 linear feet of membrane edge; measure the parapet or termination perimeter and add pieces to cover laps.
Fit and Compatibility:
Used with TRI-BUILT single-ply membrane systems and compatible termination fasteners and sealant, which are sold separately. Confirm fastener spacing against the membrane manufacturer's requirements.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One 10 ft lip termination bar, 0.09 in profile. Fasteners, sealant and membrane are not included.
Q: How much edge does one bar cover?
A: Each bar covers 10 linear feet of membrane termination edge.
Q: How is it installed?
A: Position the bar over the membrane edge and fasten at 6 in on center per the item specification, then seal per the roofing system's instructions.
Q: Will it rust?
A: The sources do not state the finish or coating material, so check the listing image or confirm with the manufacturer before use in highly corrosive environments.
Q: Is it sold in packs?
A: The selling unit is a single piece; order the number of pieces needed for your run.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Termination bars are the workhorse detail for anchoring EPDM or TPO membrane at parapets and curbs; the lip tucks the membrane edge while the fastening line locks it down. Keep the fastening line straight and at 6 in on center so the bar seats evenly, and seal the top edge per the system detail. For long runs, stagger laps slightly and butt bars tightly. For outdoor exposure questions about finish, verify coating with the manufacturer since the listing does not state it.
Wear gloves and eye protection; cut metal bar edges are sharp, and follow the membrane manufacturer's detail drawings and local code for termination securement.
Order the TRI-BUILT 0.09 in x 10 ft lip termination bar for a clean, secure membrane edge.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
