Skip to content
TopShield Steel Starter Strip with Slots, 3-1/2 in. x 10 ft., Mill Finish
Regular price $152.00Orders start at $399 — combine any items to reach the minimum. Learn more
TopShield Steel Starter Strip with Slots, 3-1/2 in. x 10 ft., Mill Finish
This TopShield steel starter strip is the foundational trim for any vinyl siding installation, securing the first row of siding to the sheathing at an accurate angle. Each carton contains 3-1/2 in. x 10 ft. mill-finish slotted strip with virtually no maintenance required. Install it along the bottom of the house perimeter before hanging the first course of vinyl siding.
Key Features:
- Foundation trim: Starter trim that locks in the first row of vinyl siding.
- Slotted design: Slots accept the siding lock for a secure, accurate-angle installation.
- Steel construction: Steel strip offers sturdy backing for the first siding course.
- Low maintenance: Virtually no maintenance once installed.
- 10 ft. lengths: 3-1/2 in. x 10 ft. strip reduces joints along long walls.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | TopShield |
| Sell unit | 1 carton |
| Product line | TopShield Steel Starter Strip with Slots |
| Available colors | Mill |
| Available sizes | 3-1/2 in. x 10 ft. |
| Dimensions | 3-1/2 in. x 10 ft. |
| Material | Steel |
| Finish / texture | Mill |
| Nominal size | 3-1/2 in. starter strip, 10 ft. length |
| Intended use | Starter trim for vinyl siding installations |
| Maintenance | Virtually no maintenance |
Coverage & How Much You Need:
Each 10 ft. strip covers 10 linear feet along the base of the wall. Measure the full perimeter of the house and divide by 10, adding allowance for cuts, to determine cartons needed.
Fit and Compatibility:
Made as an accessory for vinyl siding: the slots receive the locking edge of the first vinyl siding course. Fasten it to the sheathing along the level base line before any siding is hung.
Frequently Asked Questions (FAQ):
Q: What does one carton contain?
A: One carton contains 3-1/2 in. x 10 ft. steel starter strip with slots in mill finish.
Q: Where is starter strip installed?
A: Along the bottom of the house's perimeter, as the foundation for locking in the first row of vinyl siding.
Q: What does the starter strip do?
A: It secures the first vinyl siding slats to the sheathing and keeps the siding at an accurate angle.
Q: Does it need upkeep?
A: No, once installed it requires virtually no maintenance.
Q: What finish is it?
A: The strip is supplied in mill finish.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Set the starter strip level and straight along a chalked baseline; any error at this first course telegraphs up the wall. Allow a small gap at inside and outside corners and nail loosely in slot centers so the strip and siding can move with temperature changes.
Wear gloves when handling steel trim; cut edges and slot corners can be sharp.
Order TopShield Steel Starter Strip with Slots to start your vinyl siding job on a straight, secure base.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
