Skip to content
TopShield Galvanized Mission Bird Stop - 10 ft, 28-Gauge Steel, 3 Colors
Regular price $9.95Orders start at $399 — combine any items to reach the minimum. Learn more
TopShield Galvanized Mission Bird Stop - 10 ft, 28-Gauge Steel, 3 Colors
TopShield's Galvanized Mission Bird Stop is a 10-ft, 28-gauge galvanized steel eave closure formed for Mission-profile tile roofs. It blocks birds and debris from nesting under the first course of tile at the eave. One piece is the sell unit, and it installs under the starter course along the eave edge.
Key Features:
- Mission tile profile: Formed to match Mission tile profiles so it closes the gap at the eave without visible mismatch.
- 28-gauge steel: Made from 28-gauge galvanized steel for a rigid, long-lasting eave closure.
- 10-foot length: Each piece runs 10 ft, so fewer joints are needed along long eave runs.
- Three colors: Available in Brown, Charcoal, and Red to coordinate with common tile colors.
- Pest and debris block: Seals the eave opening against birds, rodents, and wind-blown debris under tile.
- Roofing-grade material: Galvanized finish is suited to exterior residential tile roof applications.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | TopShield |
| Sell unit | 1 piece, 10 ft |
| Product line | TopShield Galvanized Mission Bird Stop |
| Available colors | Brown, Charcoal, Red |
| Available sizes | 10 ft, 28 GA |
| Material | Galvanized steel |
| Nominal size | 10 ft length, 28 gauge |
| Intended use | Eave closure / bird stop for Mission-profile tile roofs |
| Category use | Residential roofing, eave closures and bird stops |
Coverage & How Much You Need:
One piece covers 10 linear feet of eave. Measure your total eave length and divide by 10 ft to determine the number of pieces needed, allowing a small margin for cuts and waste.
Fit and Compatibility:
Designed for Mission-profile tile roofs as part of the TopShield eave closure line. Pair with TopShield eave risers and matching flashing products; fasteners and underlayment are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One 10-ft piece of 28-gauge galvanized Mission bird stop in your selected color (Brown, Charcoal, or Red).
Q: How many pieces do I need?
A: Measure the total eave length in linear feet and divide by 10; add a bit extra for cuts and waste.
Q: What is it made of?
A: It is formed from 28-gauge galvanized steel, suitable for exterior tile roof eaves.
Q: Where does it install?
A: It installs at the eave, under the first course of Mission tile, to close the gap against birds and debris.
Q: Which colors are offered?
A: Brown, Charcoal, and Red, chosen to blend with common Mission tile colors.
Q: Does it need special fasteners?
A: Fasteners are not included; use roofing nails or screws appropriate for metal eave closures and your underlayment system.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Match the bird stop to your tile profile and color before ordering; a Mission-profile closure will not sit correctly under flat or barrel tiles of other profiles. Install it after the underlayment and drip edge but before the starter course so the tile bears on the closed eave. On windy coastal sites, fasten at closer intervals to prevent uplift at the overhang.
Metal edges can be sharp; wear cut-resistant gloves and eye protection when handling and cutting bird stop.
Order TopShield Galvanized Mission Bird Stop in Brown, Charcoal, or Red to close your tile roof eave today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
