Skip to content
TopShield Aluminum Angle Flashing, Mill, White or Brown, 4" x 5" and 5" x 5" Sizes
Regular price $730.00TopShield Aluminum Angle Flashing, Mill, White or Brown, 4" x 5" and 5" x 5" Sizes
TopShield aluminum angle flashing is an L-shaped transition and edge flashing available in 5 in. x 5 in. (.032 and .025) and 4 in. x 5 in. (.025) sizes. Color choices are mill, white and brown, and most items sell per board (BD) with the 4 in. x 5 in. mill option sold per piece. It covers wall-to-roof, fascia and edge transitions on residential roofs.
Key Features:
- Aluminum construction: Lightweight aluminum resists rust and is easy to bend and cut on site.
- Two profile sizes: Offered in 4 in. x 5 in. and 5 in. x 5 in. leg combinations.
- Gauge options: Available in .032 aluminum for the 5 in. x 5 in. mill profile and .025 for other variants.
- Three finishes: Mill, white and brown finishes let you match trim colors.
- Clean L-profile: Right-angle profile bridges transitions and provides a straight drip or termination edge.
- Flexible ordering: Sold per board (PC for one mill variant) so you can buy the run length you need.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | TopShield |
| Sell unit | 1 board (one variant sells per piece) |
| Product line | TopShield Aluminum Angle Flashing |
| Material | Aluminum |
| Color / finish | Mill, White, Brown |
| Available colors | Mill, White, Brown |
| Available sizes | 5" x 5" .032, 5" x 5" .025, 4" x 5" .025 |
| Thickness | .032 in. or .025 in. depending on variant |
| Dimensions | 4 in. x 5 in. or 5 in. x 5 in. angle profile |
| Intended use | Residential roof transition flashing |
| Category | Residential Roofing > Flashing > Transition Flashing |
Coverage & How Much You Need:
Coverage depends on the stocked board length of the variant you order; plan one board or piece per run with overlaps at joints lapped in the direction of water flow. Allow extra material for corners and miters.
Fit and Compatibility:
Pairs with TopShield residential flashing and trim products and standard shingle or metal roof systems. Fasteners and sealant are sold separately.
Frequently Asked Questions (FAQ):
Q: What sizes and colors can I choose?
A: Five variants: mill 5" x 5" in .032 and .025, and 4" x 5" .025 in white, brown and mill.
Q: Is this aluminum rust-proof?
A: Aluminum does not rust like steel; it forms a protective oxide, making it well suited for exterior flashing.
Q: What thickness should I pick?
A: .032 aluminum is stiffer for longer exposed runs; .025 is easier to work with for shorter details.
Q: How is it sold?
A: Most variants sell per board; the mill 4" x 5" .025 option sells per piece.
Q: Can it be cut on site?
A: Yes, aluminum flashing cuts easily with tin snips or a metal shear.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Angle flashing is one of the most versatile pieces on the truck: use it as a termination edge, drip edge detail or counter-flashing leg where a softer L-shape is enough. Choose .032 when the exposed leg runs long or will take handling; step down to .025 for tight miters and smaller details. Match white or brown to the trim color so the line disappears into the roof-to-wall detail.
Wear gloves and eye protection when cutting aluminum flashing; cut edges are sharp.
Get TopShield Aluminum Angle Flashing in the size and finish your project needs.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
