TITEBOND GREENchoice Fast Grab FRP Construction Adhesive, Light Beige, 4 Gallon Pail – 4054

Titebond GREENchoice Fast Grab FRP is a professional-strength, water-based construction adhesive formulated for installing FRP (fiber-reinforced plastic) panels over most porous surfaces. This listing is one 4-gallon pail in light beige, applied by trowel, covering about 50 sq ft per gallon. Its fast grab greatly reduces the need for extended bracing.

Key Features

• Fast grab power: Fast grab and bonding power greatly reduce the need for extended bracing.
• FRP specialist: Specifically formulated for installing FRP panels over most porous surfaces.
• Professional strength: Professional-strength adhesive for construction panel installation.
• Water-based: Water-base formula allows easier cleanup and low VOC content under 50 g/L.
• LEED v4 compliant: A LEED v4 Compliant adhesive suitable for green building projects.
• Broad adhesion: Bonds to fiber cement backer board, tile board, unprimed/unpainted drywall, wood and non-treated plywood.

Specifications

Manufacturer model

4054

UPC

037083040548

Sell unit

1 pail, 4 gallons

Material

Water-based emulsion polymer adhesive

Color / finish

Light Beige

Container

4 gal pail

Coverage per unit

50 sq ft/gal (about 200 sq ft per 4-gal pail)

Application method

Trowel

Application temperature

50-90°F

Service temperature

0-110°F

VOC content

<50 g/L

Viscosity

100,000 cPs

pH range

5

Flash point

>200°F

Shelf life

2 years

Base type

Water

Form

Liquid

Pack quantity

36 pails per box/pallet unit

Intended use

Installation of FRP (fiber-reinforced plastic) panels over porous surfaces

Product weight, complete sell unit

50.58 lb

Coverage and How Much You Need

Coverage is approximately 50 sq ft per gallon, so one 4-gallon pail covers roughly 200 sq ft of panel bonding. Apply by trowel at 50-90°F for best results.

Fit and Compatibility

Designed for FRP panels over porous surfaces including fiber cement backer board, tile board, unprimed/unpainted drywall, wood and non-treated plywood. It pairs with standard FRP panel installation; panel fasteners or bracing used with adhesive are sold separately.

Frequently Asked Questions

What is included in the order?

One 4-gallon pail of Titebond GREENchoice Fast Grab FRP Construction Adhesive in light beige.

How much area will one pail cover?

At about 50 sq ft per gallon, a 4-gallon pail covers approximately 200 sq ft.

What surfaces can I bond FRP to?

It adheres FRP over most porous surfaces, including fiber cement backer board, tile board, unprimed/unpainted drywall, wood and non-treated plywood.

How is it applied?

Apply by trowel at temperatures between 50 and 90°F; the fast grab reduces the need for extended bracing.

Is it suitable for green building projects?

Yes, it is a LEED v4 Compliant, water-based adhesive with VOC content under 50 g/L.

What is the shelf life?

The adhesive has a 2-year shelf life when stored properly.

Product Expert Notes

This is the go-to adhesive for FRP panel installation in commercial kitchens, restrooms and utility spaces where fast grab cuts down bracing time. Trowel evenly across the back of the panel and onto a clean, porous substrate for full contact. If you need smaller quantities, this adhesive is also offered in gallon and 3.5-gallon pails.

Consult the SDS before use, apply only within the 50-90°F application window, and ensure adequate ventilation during installation.

Order Titebond GREENchoice Fast Grab FRP Adhesive 4-gallon pail for fast, professional FRP panel installs.