Skip to content
Tesla Drip Edge, Mill Finish, 10 ft. and 120 in. Lengths
Regular price $11.69Orders start at $399 — combine any items to reach the minimum. Learn more
Tesla Drip Edge, Mill Finish, 10 ft. and 120 in. Lengths
Tesla drip edge is mill-finish metal edging offered in two profiles: 4.41 in. x 1.15 in. x 10 ft. and 5 in. x 2 in. x 120 in., each sold as one piece. It directs water off the roof edge and is used in metal edging applications on Tesla solar roof installations.
Key Features:
- Two profiles: Available in 4.41 in. x 1.15 in. x 10 ft. and 5 in. x 2 in. x 120 in. sizes.
- Mill finish: Both variants are supplied in mill finish.
- Water control: Drip edge directs water away from the roof edge and fascia.
- Sold per piece: Each variant sells as a single piece for straightforward quantity takeoff.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Tesla |
| Sell unit | 1 piece, 10 ft. |
| Product line | Tesla Drip Edge |
| Available colors | ['Mill'] |
| Available sizes | ['4.41" x 1.15" x 10\'', '5" x 2" x 120"'] |
| Dimensions | 4.41 in. x 1.15 in. x 10 ft. or 5 in. x 2 in. x 120 in. |
| Length | 10 ft. or 120 in. (10 ft.) |
| Intended use | Metal drip edge edging at roof perimeters |
Coverage & How Much You Need:
Each piece is 10 ft. long; plan roughly one piece per 10 linear feet of roof edge, plus waste at corners and overlaps as required by the installation detail.
Fit and Compatibility:
Intended for use with Tesla solar roof systems as perimeter metal edging. Confirm the profile (4.41 in. x 1.15 in. or 5 in. x 2 in.) against the specific Tesla roof assembly before ordering.
Frequently Asked Questions (FAQ):
Q: What sizes are available?
A: Two variants: 4.41 in. x 1.15 in. x 10 ft. and 5 in. x 2 in. x 120 in., both in mill finish.
Q: How many pieces do I need?
A: Each piece is 10 ft. long, so divide total roof-edge linear footage by 10 and add waste for corners.
Q: What finish is it?
A: Both variants come in a mill finish.
Q: Is it for Tesla solar roofs only?
A: It is listed as Tesla drip edge for metal edging; verify compatibility with your specific Tesla roof assembly.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Order the profile that matches the Tesla roof assembly's eave detail, since the two sizes serve different edge build-ups. Overlap drip edge joints in the direction of water flow and install along the eaves before underlayment at the rake per standard practice. Measure total perimeter in 10-ft. increments to minimize joints.
Metal edging edges can be sharp; wear cut-resistant gloves when handling and cutting drip edge.
Order Tesla drip edge in mill finish to finish the perimeter of your solar roof installation.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
