Skip to content
Tapcon Hex Drive Screw Anchor Climaseal, 1/4 in. x 1-1/4 in., 225/Box, Blue
Regular price $102.99Orders start at $399 — combine any items to reach the minimum. Learn more
Tapcon Hex Drive Screw Anchor Climaseal, 1/4 in. x 1-1/4 in., 225/Box, Blue
These Tapcon hex drive screw anchors with Climaseal coating tap into concrete, block, and masonry without anchors or inserts. The 1/4 in. x 1-1/4 in. blue screws come 225 to a box. They are a fast, removable masonry fastener for shutters, sill plates, and exterior attachments.
Key Features:
- Hex drive head: Hex drive head installs quickly with a socket or nut driver.
- Climaseal coating: Climaseal coating provides corrosion resistance for exterior use.
- No anchors needed: Screw anchors tap their own threads in concrete, block, and masonry, no separate insert required.
- 1/4 x 1-1/4 size: The listed size is 1/4 in. x 1-1/4 in.
- 225-count box: Sold in a box of 225 screws, with a carton-level sell unit.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Tapcon |
| Sell unit | 1 carton (225 screws per box) |
| Product line | Tapcon Hex Drive Screw Anchor (Maxi-Set Tapcon line per manufacturer site) |
| Dimensions | 1/4 in. x 1-1/4 in. |
| Material | Steel with Climaseal coating |
| Color / finish | Blue Climaseal |
| Drive type | Hex |
| Pack quantity | 225 per box |
| Intended use | Concrete, block, and masonry screw anchoring |
| Approvals | See manufacturer (Tapcon) product page for listings |
Coverage & How Much You Need:
One box of 225 screws fastens 225 one-screw attachment points at 1/4 in. x 1-1/4 in.; size your order from fastener count times 10-15% spares for breakage or re-taps.
Fit and Compatibility:
For use in concrete, block, and masonry substrates. Requires a 3/16 in. (5/32 in. for 1/4 in. per Tapcon instructions) carbide bit per Tapcon's published install instructions and a hex driver; check the manufacturer's installation guide for the exact bit diameter and embedment.
Frequently Asked Questions (FAQ):
Q: What is included?
A: A box of 225 blue 1/4 in. x 1-1/4 in. hex drive Tapcon screw anchors with Climaseal coating.
Q: Do I need to buy anchors or plugs?
A: No, Tapcon screws tap their own threads in masonry; you only need the correct carbide drill bit and driver.
Q: What substrates work?
A: Concrete, block, and masonry, including applications such as shutters, sill plates, screened porches, and hurricane protection hardware.
Q: What drives them?
A: A hex drive, using a nut driver or socket.
Q: Will they rust outdoors?
A: The Climaseal coating is designed for corrosion resistance in exterior applications.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
1/4 in. x 1-1/4 in. is the standard short Tapcon for attaching sill plates, shutters, and light hardware to slab or block. Drill the hole the manufacturer's specified diameter and depth, blow out the dust, and drive at moderate speed to avoid overheating the Climaseal coating. For repetitive installs, a nut driver on a hammer-drill's low setting or impact driver speeds the job considerably.
Always wear eye protection when drilling concrete; follow the manufacturer's bit diameter, embedment, and torque guidance to avoid overdriving or snapping screws.
Stock up on Tapcon 1/4 in. x 1-1/4 in. hex drive Climaseal screw anchors, 225 per box.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
