STOCKTON PRODUCTS SVR 1/2 in. Galvanized Steel Vented Soffit Vent Reveal Screed, 10 ft. – SVR012V200

The Stockton Products SVR soffit vent/reveal screed is a galvanized steel stucco accessory, 120 in. long with a 1/2 in. X depth and 3/4 in. Y reveal. The vented version provides required perimeter airflow into the soffit air space. One sell unit is one 10 ft. length of SVR012 034 in galvanized steel.

Key Features

• Vented airflow: Standard soffit vent provides required perimeter airflow into the soffit air space.
• Galvanized steel: Made of galvanized steel (GS) per the manufacturer's material list.
• 1/2 in. X depth: X (depth) size is 1/2 in. per the part number SVR012 034.
• 3/4 in. reveal: Y (reveal) size is 3/4 in. per the part number SVR012 034.
• Crack control: The screed format provides crack control in stucco exterior applications.
• Custom options: Special sizes, curved shapes and 1/8 in., 1/4 in. or non-vented hole options are available from the manufacturer.

Specifications

Manufacturer model

SVR012V200

Sell unit

1 length, 10 ft. (X=1/2 in., Y=3/4 in., galvanized steel)

Material

Galvanized steel

Color / finish

Galvanized

Product type

Soffit vent/reveal screed

Length

120 in. (10 ft.)

X (depth) size

1/2 in.

Y (reveal) size

3/4 in.

Vent option

Vented

Available X sizes

3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in., 1 in. or 1-3/8 in.

Available Y sizes

3/4 in. to 6 in. in 1/2 in. increments

Other materials available

Aluminum, Copper, Galvanized Steel, Bonderized, Galvalume, Stainless Steel, Zinc

Intended use

Stucco soffit perimeter venting and shadow-line reveal with crack control

Standards

Meets applicable ASTM & code standards including C1063, A653 and C1047

Coverage and How Much You Need

One piece is 120 in. (10 ft.) long; divide the total soffit perimeter footage by 10 to estimate the number of lengths needed, plus waste at miters and laps.

Fit and Compatibility

Designed for stucco exterior soffit assemblies where a vented perimeter reveal is required. X, Y and material combinations are subject to availability, and custom or curved sizes are made to order through the manufacturer.

Frequently Asked Questions

What does this product do?

It forms a reveal at the stucco soffit edge while the vent holes allow perimeter airflow into the soffit air space.

What size is this part?

SVR012 034 is X=1/2 in., Y=3/4 in., galvanized steel, 10 ft. long.

Is a non-vented version available?

Yes, SVR screed is available with 1/8 in. or 1/4 in. vent holes or with no vent for shadow lines and accent stripes.

How is it installed?

The manufacturer publishes an SVR installation guide; the manufacturer notes the generic guide should not be used for design without review by a qualified architect or engineer.

What is it made of?

This version is galvanized steel; the SVR line is also offered in aluminum, copper, bonderized, Galvalume, stainless steel and zinc.

Product Expert Notes

Vented SVR screed belongs at the soffit edge of stucco walls to establish intake airflow and a clean reveal line; keep the 1/2 in. X depth matched to your stucco membrane build-up so the screed sits flush. Confirm the Y reveal against your trim detail, and order the non-vented variant where you want accent shadow lines without airflow.

Sheet metal edges can be sharp; wear gloves and eye protection when cutting and installing metal screed, and have the assembly reviewed by a qualified professional where required.

Order the Stockton Products SVR 1/2 in. galvanized vented soffit reveal screed for clean, ventilated stucco soffit edges.