Skip to content
SR Wood Dura-Bull Flat Cut Quick Wood Veneer Sheet, 96 in L x 48 in W, Teak
Regular price $108.32Orders start at $399 — combine any items to reach the minimum. Learn more
SR Wood Dura-Bull Flat Cut Quick Wood Veneer Sheet, 96 in L x 48 in W, Teak
This SR Wood Dura-Bull Quick Wood veneer sheet measures 96 in. long by 48 in. wide with a flat cut teak face. Dura-Bull's poly-resin backing gives it laminate-like strength, and it bonds with water-based or solvent-based adhesives. One sell unit is 1 sheet.
Key Features:
- Teak face veneer: The sheet features a flat cut teak wood veneer face.
- Full sheet size: The sheet measures 96 in. long by 48 in. wide.
- Poly-resin backing: Dura-Bull's poly-resin backing provides the strength of a phenolic backed laminate.
- Post-formable: Dura-Bull can be post-formed like 20 mil paper for rolled edges.
- Glue barrier: A strong glue barrier is included, safe with water-friendly stains, finishes and vintage finishes.
- Adhesive flexibility: Works with either water-based or solvent-based adhesive systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | SR Wood |
| Sell unit | 1 sheet |
| Series | Dura-Bull |
| Design name | Flat Cut Quick Wood Veneer Sheet |
| Color / finish | Teak |
| Cut | Flat cut |
| Length | 96 in. |
| Width | 48 in. |
| Backing | Poly-resin backing with glue barrier |
| Recommended use | Horizontal or vertical interior surfaces; can be post-formed like 20 mil paper |
| Adhesive systems | Water-based or solvent-based |
Coverage & How Much You Need:
One 96 in. x 48 in. sheet covers 32 sq. ft. of surface. Lay out the sheet on your substrate before cutting to make the best use of the grain and minimize seams.
Fit and Compatibility:
Bonds to particleboard, MDF or plywood cores using water-based or solvent-based adhesives. Pair with a backer veneer or laminate on the reverse face to keep panels flat; sold separately.
Frequently Asked Questions (FAQ):
Q: How much area does one sheet cover?
A: A 96 in. x 48 in. sheet covers 32 sq. ft. before trimming waste.
Q: What color is the veneer?
A: The face is flat cut teak.
Q: What adhesive should I use?
A: Any water-based or solvent-based veneer adhesive, including contact cement, works with this sheet.
Q: Can I use it on a rolled countertop edge?
A: Yes, Dura-Bull can be post-formed like 20 mil paper.
Q: Is the backing wood or synthetic?
A: It has a poly-resin backing with a glue barrier, giving it the strength of a phenolic backed laminate.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The 48 in. width lets you veneer a full countertop blank or tall cabinet side in one piece with no seam. Acclimate the sheet in the shop for a day or two before bonding, and cut teak faces with a sharp fresh blade since teak's oiliness can gum up dull edges. Keep contact adhesive coats thin and let them fully flash off before mating the surfaces.
Cut veneer edges and trimming blades are sharp; wear cut-resistant gloves and eye protection when trimming sheets.
Order the SR Wood Dura-Bull flat cut teak veneer sheet for strong, post-formable teak surfacing.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
