Skip to content
SnapNrack Array Edge Screen 6 in. or 8 in. x 100 ft Roll for Solar Arrays
Regular price $83.50Orders start at $399 — combine any items to reach the minimum. Learn more
SnapNrack Array Edge Screen 6 in. or 8 in. x 100 ft Roll for Solar Arrays
The SnapNrack Array Edge Screen is a critter-guard mesh sold as a 100 ft roll in 6 in. or 8 in. heights. It installs along the outer edges of a rooftop solar array to block birds, rodents and debris from nesting under panels. Pair it with SnapNrack array edge attachment hardware for a complete critter-guard system.
Key Features:
- Nesting protection: Screens array edges to keep birds and rodents from nesting beneath solar modules.
- Two heights: Available in 6 in. and 8 in. widths to match panel clearance and wind exposure.
- 100 ft rolls: Each roll delivers 100 linear feet of edge coverage.
- Module-friendly: Attaches along module frames without voiding panel airflow design intent.
- SnapNrack system: Designed as part of the SnapNrack residential solar mounting line.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | SnapNrack |
| Sell unit | 1 roll, 6 in. or 8 in. x 100 ft |
| Product line | SnapNrack residential solar mounting |
| Available sizes | ['6 in. x 100 ft', '8 in. x 100 ft'] |
| Dimensions | 6 in. or 8 in. wide by 100 ft long |
| Length | 100 ft per roll |
| Width | 6 in. or 8 in. |
| Intended use | Array edge critter and debris guard for rooftop solar |
Coverage & How Much You Need:
Each 100 ft roll covers 100 linear feet of array perimeter. Measure the array's outer edge (not the module area) and choose 6 in. height for standard clearance or 8 in. where greater coverage or wind exposure is expected.
Fit and Compatibility:
Part of the SnapNrack residential solar system; use with SnapNrack array edge attachment clips and rail mounting hardware, sold separately. Confirm attachment spacing per SnapNrack installation instructions.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 100 ft roll of array edge screen in your chosen 6 in. or 8 in. height; fasteners are sold separately.
Q: How much does one roll cover?
A: 100 linear feet of array perimeter edge.
Q: Which height should I pick?
A: 6 in. suits most standard installs; choose 8 in. for panels with greater standoff or where extra coverage is desired.
Q: Does it keep birds out?
A: Yes, it is designed to block birds, rodents and debris from getting under the array.
Q: Is it compatible with my rack?
A: It is designed for SnapNrack mounting systems; verify attachment method against your rail and module frame.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Measure the full array perimeter, including hip and rake edges, before ordering and add roughly 10% for corners and contouring. The 8 in. roll suits higher-standoff tilt legs and areas with heavy bird pressure. Install the screen with SnapNrack edge clips at the manufacturer's spacing so the mesh stays tight and does not stress the module frame.
Work only under proper fall protection; wear gloves as cut mesh edges can be sharp when trimming to length.
Order SnapNrack Array Edge Screen to protect your solar array from nesting birds and debris.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
